Date Format - Panasonic HDC-HS900 Operating Instructions Manual

5
(Only when setting the region of your travel
destination)
Touch /
destination and touch [ENTER].
≥ Touch [SUMMER TIME SET] to set daylight
saving time.
summer time setting is turned on. The travel
destination time and time difference from
the home region time are set forward by one
hour. Touch [SUMMER TIME SET] again to
return to the normal time setting.
≥ Close the setting by touching [EXIT].
appears and the time of the travel destination is
indicated.
To return the display to the home setting
Set the home region using step 1 to 3, and close the setting by touching [EXIT].
≥ If you cannot find your travel destination in the area shown on the screen, set it by using
the time difference from your home region.
[DATE/TIME]
It is possible to change the date and time display mode.
≥ You can also show or change the date and time display by repeatedly pressing the DATE/
TIME button on the remote control.

[DATE FORMAT]

It is possible to change the date format.
[ECONOMY]
When about 5 minutes have passed without any operation, this unit automatically turns off to
save battery life.
≥ The power save function will not activate when:
j connected to AC adaptor
j using the USB cable for PC, DVD burner etc.
j PRE-REC is used
42
VQT3K80
to select your travel
appears and the
[OFF]/[D/T]/[DATE]
[Y/M/D]/[M/D/Y]/[D/M/Y]
[OFF]/[5 MINUTES]
C The local time at the selected
travel destination
D The time difference between
the travel destination and the
home region