Panasonic HDC-HS900 Operating Instructions Manual page 44

[REMOTE CONTROL]
Please refer to page 49.
[REC LAMP]
The recording lamp lights up during recording and flashes when the unit receives a signal
from the remote control or when the self-timer is counting down. When this is set to [OFF], it
does not light during recording.
[ALERT SOUND]
Touch screen operation, start and stop of recording and unit on/off can be confirmed with this
sound.
(Volume low)/
2 Beeps for 4 times
When an error occurs. Check the sentence displayed on the screen. (l 142)
[POWER LCD]
This makes it easier to view the LCD monitor in bright places including outdoors.
≥ These settings will not affect the images actually recorded.
≥ It is possible to set from the quick menu. (l 40)
+2 (Makes even brighter)/
*(Automatic adjustment)
A
* It is not displayed in the manual mode or in the playback mode.
≥ When the AC adaptor is in use, the LCD monitor is set to
≥ When the LCD monitor is bright, the recordable time with the battery will be shorter.
[LCD SET]
It adjusts brightness and colour density on the LCD monitor.
≥ These settings will not affect the images actually recorded.
1 Touch [LCD SET].
2 Touch the desired setting item.
[BRIGHTNESS]:
Brightness of the LCD monitor
[COLOUR]:
Colour level of the LCD monitor
3 Touch /
4 Touch [ENTER].
≥ Touch [EXIT] to exit the menu screen.
44
VQT3K80
[OFF]/[ON]
[OFF]/[ON]
[OFF]/
(Volume high)
+2 /
+1
(Makes brighter)/
to adjust settings.
/
+1 / 0 / -1 / A
0
(Normal)/ (Makes less bright)/
-1
+1 automatically.