Panasonic HDC-HS900 Operating Instructions Manual page 74

[BASS SETTING]
Change the lower setting of the built-in microphone according to your choice.
≥ Switch to manual mode. (l 80)
: [RECORD SETUP] # [BASS SETTING] # desired setting
MENU
[0dB]/[+3dB]/[+6dB]/[LOWCUT]
≥ Normally set to [0dB].
≥ Select [+3dB] or [+6dB] to get strong power feeling at bass level.
[PICTURE ADJUST]
Adjust the quality of the image while recording.
Adjust by outputting to a TV while adjusting the quality of the image.
≥ This setting is retained when you change between motion picture recording mode
and still picture recording mode.
≥ Switch to manual mode. (l 80)
1 Select the menu.
: [RECORD SETUP] # [PICTURE ADJUST]
MENU
2 Touch the desired setting items.
[SHARPNESS]:
[COLOUR]:
[EXPOSURE]:
[WB ADJUST]:
3 Touch /
4 Touch [ENTER].
≥ Touch [EXIT] to complete the settings.
≥
appears on the screen.
[ZEBRA]
Parts where white saturation (colour saturation) is likely to
occur (extremely brightly lit or shiny parts) are displayed
with diagonal lines (zebra pattern).
≥ Switch to manual mode. (l 80)
: [RECORD SETUP] # [ZEBRA] # [ON]
MENU
≥ It is possible to set from the quick menu in manual
mode. (l 40)
≥ You can record an image with little white saturation if you
manually adjust the shutter speed or brightness (iris/gain) (l 82).
≥ The zebra pattern does not appear on the images actually recorded.
74
VQT3K80
Sharpness of the edge
Depth of the colour of the image
Brightness of the image
Picture colour balance
to adjust settings.
A Zebra pattern