Palm Treo 755P User Manual page 259
Sprint power vision smart device
Hide thumbs
Also See for Treo 755P:
- User manual (304 pages) ,
- Getting started manual (130 pages) ,
- Quick reference (60 pages)
Table of Contents
Advertisement
On a Windows computer:
1.
On your computer, click the HotSync manager
taskbar in the lower-right corner of your screen. Make sure
that Infrared is selected.
2.
On your device, press Applications
3.
Select Local.
4.
Select the pick list below the HotSync icon and select IR to a
PC/Handheld.
5.
Position the IR port of your device within a few inches or centimeters of the IR port of
your computer.
6.
Select the HotSync
When synchronization is complete, a message appears at the top of your device screen. Be
patient; synchronization may take a few minutes.
On a Mac computer:
1.
Double-click the HotSync manager
2.
From the HotSync Controls tab, select Enabled.
3.
Click the Connection Settings tab, and then check the On box next to IR port.
4.
Close the HotSync Software Setup screen.
5.
On your device, press Applications
6.
Select Local.
7.
Select the pick list below the HotSync icon, and select IR to a PC/Handheld.
8.
Position the IR port of your device within a few inches or centimeters of the IR port of
your computer.
9.
Select the HotSync
Section 6A: Managing Files
and select HotSync
icon on your device.
icon in the Palm folder.
and select HotSync
icon on your device.
icon in the
.
.
251
Advertisement
Table of Contents
