Removing The Drawer - DCS Professional Warming Drawer WDT-30 Use And Care Manual

CARE AND MAINTENANCE

REMOVING THE DRAWER

Turn the unit off. Be sure the drawer is cool and no food items or trays are in the drawer. Never attempt to
remove the drawer while the unit is on or warm.
1. To remove the drawer, first remove plates, trays, etc., from the drawer.
2. Pull the drawer open towards you all the way until it reaches the stop position (Fig. 03).
3. Unlock the drawer by lifting up the tab on the left hand side (Fig. 04) and pressing down the tab on the right
hand side (Fig. 05). Pull the drawer open at the same time (Fig. 06).
Note:
Removing the drawer for the very first time does require extra force.
4. Keep pulling the drawer open until the slides are separated.
Fig. 05
8
Fig. 03
Fig. 04
Fig. 06