Sonance NAVIGATOR HARBOR Installation Instructions Manual

IMPORTANT SAFETY INSTRUCTIONS
When using your Sonance Navigator Harbor, basic safety pre-
cautions should always be followed to reduce the risk of fire,
electric shock, and injury to persons, including the following:
1. Read instructions – All the safety and operating instructions
should be read before the appliance is operated.
2. Retain instructions – The safety and operating instructions
should be retained for future reference.
3. Heed warnings – adhere to all warnings and precautions
listed on the appliance and in the operating instructions.
4. Follow instructions – Follow all operating instructions.
5.Water and moisture – The appliance should never be used next
to water; for example,near a bathtub,kitchen sink,laundry tub,
in a wet basement, or near a swimming pool, etc.
6. Carts and stands – The appliance should be used only with
a cart or stand that is recommended by the manufacturer.
7. An appliance and cart combination should be moved with
care. Quick stops, excessive force, and uneven surfaces may
cause the appliance and cart combination to overturn.
8. Caution: To prevent electric shock, do not use the Sonamp
(polarized) plug with an extension cord, receptacle, or other
outlets unless the blades can be fully inserted to prevent
blade exposure.
9. Ventilation – The appliance should be situated so that its
location does not interfere with its proper ventilation. For
example, the appliance should not be situated on a bed,
sofa, register, or similar surface that may impede the flow of
air through the ventilation openings.
10. Heat – The appliance should be situated away from heat
sources such as radiators, heat registers, stoves, or other
appliances (including amplifiers) that produce heat.
11. Power sources – The appliance should be connected to a
power supply only of the type described in the operating
instructions or as marked on the appliance.
12. Grounding or polarization – Grounding or polarization
are the precautions that should be taken so that these
attributes of an appliance are not defeated.
13. Power-Cord Protection - Power supply cords should be
routed so that they are not likely to be walked on or pinched
by items placed upon or against them, paying particular
attention to cords at plugs, convenience receptacles, and
the point where they exit from the appliance.
14. Cleaning - The appliance should be cleaned only as
recommended by the manufacturer.
15. Non-Use Periods- The power cord of the appliance should
be unplugged from the outlet when left unused for a long
period of time.
16. Object and Liquid Entry - Care should be taken so that
objects do not fall and liquids are not spilled through the
opening of the enclosure.
17. Damage Requiring Service - The appliance should be
serviced by a qualified service personnel when:
A. The power-supply cord or the plug has been damaged
INSTALLATION INSTRUCTIONS
SONANCE NAVIGATOR
M U L T I - Z O N E
PN.33-2112 8.01
B. Objects have fallen, or liquid has been spilled into the appliance
C. The appliance has been exposed to rain
D. The appliance does not appear to operate normally or exhibits a
marked change in performance
E. The appliance has been dropped, or the enclosure damaged
18. Servicing - The user should not attempt to service
the appliance beyond that described in the operating
instructions.All other servicing should be referred to
qualified service personnel.
19. Lifting – Do not attempt to lift the Sonance Navigator
Harbor without assistance. Improper lifting of this 35 lb.
unit can cause personal injury.
20. Power requirement – Do not connect the Sonance
Navigator Harbor to the accessory outlet of another
component.
21. Storms – To prevent damage to components, unplug all
electronic equipment during thunderstorms.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
WARNING: TO PREVENT FIRE OR SHOCK HAZARD,
1
HARBOR INSTALLER'S MANUAL
™
P R E - A M P L I F I E R
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
DO NOT REMOVE COVER (OR BACK)
NO USER SERVICEABLE PARTS INSIDE
REFER SERVICING TO AUTHORIZED
SERVICE PERSONNEL.
The lighting flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated dangerous voltage within the
product's enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the
literature accompanying the appliance.
DO NOT EXPOSE THIS APPLIANCE TO
RAIN OR MOISTURE.
WARNING
MOVE WITH CARE