s.............................................................Adjusting the brightness of the monitor
s
BACK
MENU
SET
X..................................................................................... Setting the date and time
The date and time is saved with each image, and is used in the file name.
X
Y Y
M D D T I M E
T I M E
----.--.-- --:--
----.--.-- --:--
Y / M / D
Y / M / D
CANCEL
MENU
• The first two digits of [Y] are fixed.
• The time is displayed in the 24-hour format.
• To set the time precisely, with the cursor at either "minute" or [Y/M/D], press as the time signal
strikes 00 seconds.
DUALTIME..................................... Setting the date and time in another time zone
OFF
Switches to the date and time set in [X]. Pictures are recorded with the date
and time set in [X].
ON
Switches to the date and time set in [DUALTIME]. When setting the dual time, select [ON],
and then set the time. Pictures are recorded with the date and time set in [DUAL TIME].
D U A LT I M E
Y Y
M D D T I M E
T I M E
2006.11 11.26 26 12 12:30 30
2006
CANCEL
MENU
• The date format is the same as that set with [X].
• The first two digits of [Y] are fixed.
• The time is displayed in the 24-hour format.
ALARM CLOCK .................................................................................. Setting alarms
OFF
No alarm is set or alarm is canceled.
ONE TIME
Alarm is activated only once. After
the alarm goes off, the setting is
canceled.
DAILY
Alarm is activated daily at the set time.
1 : Brightens the monitor. 2: Darkens the monitor.
Press to confirm your selection.
OK
Y-M-D (Year-Month-Day)
Hour
Minute
Date formats (Y-M-D, M-D-Y, D-M-Y)
Exits a setting.
m: Exits a setting.
• When [X] has not been set, [ALARM
CLOCK] is not available.
• When [SILENT MODE] is set to [ON],
the alarm will not sound.
• When [DUAL TIME] is set to [ON], the
alarm sounds according to the dual time
date and time setting.
35
EN