Using Olympus Master 2; Starting Olympus Master - Olympus Stylus 7000 Instruction Manual

Using OLYMPUS Master 2

System requirements and
installation of OLYMPUS
Master 2
Install the OLYMPUS Master 2 software by
referring to the included installation guide.
Connecting the camera to a
computer
1
Make sure the camera is turned off.
●
The monitor is off.
●
The lens is retracted.
2
Connect the camera to a computer.
●
The camera automatically turns on.
Open the connector cover
in the direction of the arrow.
Locate the position of the USB port by referring
to your computer's instructions manual.
3
Use LM to select [PC], and press
the E button.
●
The computer automatically detects the camera as a
new device on the fi rst connection.
48 EN
Multi-
connector
USB cable (supplied)
USB
PC
EASY PRINT
CUSTOM PRINT
EXIT
SET
Windows
After the computer detects the camera, a
message indicating the success of the operation
will appear. Confi rm the message by clicking
"OK."
The camera is recognized as a removable disk.
Macintosh
When iPhoto started, exit iPhoto and start
OLYMPUS Master 2.
While the camera is connected to the
computer, shooting functions are disabled.
Connecting the camera to a computer via a
USB hub may cause unstable operation.
When [MTP] is set for the submenu that
appears by pressing O after selecting [PC]
in Step 3, images cannot be transferred to a
computer using OLYMPUS Master 2.

Starting OLYMPUS Master 2

1
Double-click the OLYMPUS Master 2
icon.
Windows
appears on the desktop.
Macintosh
appears in the OLYMPUS Master 2 folder.
●
Browse window appears after starting the
software.
When OLYMPUS Master 2 is started for the
fi rst time after installation, "Default Settings"
and "Registration" screens will appear. Follow
the instructions on the screen.
OK