Taking Pictures With - Olympus Stylus 7000 Instruction Manual

Taking pictures with

[COMBINE IN CAMERA 1]
1 Press the shutter button to take the fi rst
frame.
2 Move the camera slightly in the direction of
the second frame.
Target mark
Pointer
3 Move the camera slowly while keeping it
straight, and stop the camera where the
pointer and target mark overlap.
●
The camera releases the shutter automatically.
To combine only two pictures, press the
E button before taking a third frame.
4 Repeat Step 3 to take a third frame.
●
After the third frame is taken, the camera
automatically processes the frames and the
combined panorama image is displayed.
To exit the panorama function without saving
an image, press the m button.
If the shutter does not automatically release,
try [COMBINE IN CAMERA 2] or [COMBINE IN
PC].
30 EN
CANCEL SAVE OK
MENU
Screen when combining
images from left to right
CANCEL SAVE OK
MENU
Taking pictures with
[COMBINE IN CAMERA 2]
1 Use NO to specify at which edge the next
picture is to be connected.
Direction for
combining the
next frame
CANCEL
2 Press the shutter button to take the fi rst
frame.
●
A guide frame appears as a reference.
CANCEL
MENU
1st frame
3 Compose the next shot so that the
joint area overlaps the guide frame.
CANCEL SAVE
MENU
Composition of the 2nd frame
4 Press the shutter button to take the next
shot.
To combine only two pictures, press the
E button before taking the third frame.
5 Repeat steps 3 and 4 to take a third
frame.
●
After the third frame is taken, the camera
automatically processes the frames and the
combined panorama image is displayed.
To exit the panorama function without saving
an image, press the m button.
MENU
Guide frame
Joint area
CANCEL
MENU
OK