Mayr ROBA-slip hub 100 Series Installation And Operational Instructions

Installation and Operational Instructions for
®
ROBA -slip hubs
Sizes 0 – 12
Translation of the Original Operational Instructions
Please read these Operational Instructions carefully and follow them accordingly!
Ignoring these Instructions may lead to malfunctions or to clutch failure, resulting in damage to other parts.
These Installation and Operational Instructions (I + O) are part of the clutch delivery.
Contents:
Page 1: - Contents
- Safety and Guideline Signs
- Safety Regulations
Page 2: - Clutch Illustrations
- Parts List
Page 3: - Clutch Illustrations
- Parts List
Page 4: - Function
- State of Delivery
- Additional Instructions for Types 13_._ _ _
- Friction Linings
Page 5: - Rustproof Friction Pairing
- Important Installation Guidelines
- Installation
Page 6: - Bearing Bushing
- Needle Bearing
- Cup Spring Layering
Page 7: - Torque Adjustment Sizes 0 – 5
- Adjustment Table (Size 0)
Page 8: - Torque Adjustment Sizes 0 – 5
Page 9: - Torque Adjustment Sizes 6 – 12
Page 10: - Adjustment Tables (Radial Adjusting Nut
Sizes 01 – 5)
Page 11: - Adjustment Tables (Triple Layering Sizes 1 – 2)
Page 12: - Adjustment Tables (Triple Layering Sizes 3 – 5)
- Disposal
Safety Regulations
These Installation and Operational Instructions (I + O) are part of the clutch delivery.
Please keep them handy and near to the clutch at all times.
It is forbidden to start initial operation of the product until you have ensured that all applicable EU directives and directives
for the machine or system, into which the product has been installed, have been fulfilled.
At the time these Installation and Operational Instructions go to print, the ROBA
technical specifications and are operationally safe at the time of delivery.
Without a conformity evaluation, this product is not suitable for use in areas where there is a high danger of explosion.
This statement is based on the ATEX directive.
CAUTION

If the ROBA

If the relevant standards for safety and / or installation conditions are ignored.
User-implemented Protective Measures

Cover all moving parts to protect against seizure, dust or foreign body impact.

Do not breathe in the friction lining deposits. Remove the dust when cleaning by means of a vacuum cleaner.

The ROBA
To prevent injury or damage, only specialist personnel are allowed to work on the components. They must be
familiar with the dimensioning, transport, installation, initial operation, maintenance and disposal according to
the relevant standards and regulations.
Please read the Installation and Operational Instructions carefully prior to installation and initial operation of the
device.
03/02/2022 GC/TK/GH/GF
Page 1 of 12
Please keep them handy and near to the clutch at all times.
®
-slip hubs are modified.
®
-slip hub heats up during slipping. On contact => Danger of burns.
These Safety Regulations are user hints only and may not be complete!
Chr. Mayr GmbH + Co. KG
Eichenstraße 1, D-87665 Mauerstetten, Germany
Phone: +49 8341 804-0, Fax: +49 8341 804-421
www.mayr.com, E-Mail:
Safety and Guideline Signs
CAUTION
Danger of injury to personnel and damage to
machines.
Please Observe!
Guidelines on important points.
®
-slip hubs accord with the known
public.mayr@mayr.de
(B.1.0.EN)