Recording sound
Sound can be added to a still picture that you have already taken. You can
also re-record over the sound that has already been recorded. Total
recording time per picture is approximately 4 seconds.
1
Select the still picture you want to add sound to.
2
In the top menu, select MODE MENU T
PLAY T
~
"How to use the menus" (P. 28)
3
Press
to display START.
4
Turn the camera microphone toward the
sound you want to record and press
start recording.
● The BUSY bar is displayed during recording.
6
• To obtain the optimum sound, the microphone should be placed no
farther than 1 m (3.3 ft.) away from the subject.
Note
• If you re-record the sound, the original sound is erased.
• You may not be able to record sound when there is insufficient card
memory (the CARD FULL message is displayed).
• Sound recording may pick up camera noises, such as button
operation or shutter movement.
• Once sound is added to a picture, it is not possible to erase only the
sound. In this case, make a re-recording with silence.
98
.
to
START