Operational Sequence - Olympus CAMEDIA C-470 Zoom Advanced Manual

Operational Sequence

You can transfer images from the card in the camera to your computer by connecting
the camera to the computer with the supplied USB cable.
Connecting the camera to computer using supplied USB cable
Disconnecting the camera from your computer
Use of the AC adapter (sold separately) is recommended when using the camera
with a computer. If you use the battery, make sure that it is fully charged. Note that
the camera's battery will continuously discharge (use energy) when connected
(communicating) with a computer. If the battery power is exhausted, the camera
5
will stop operating and the computer may malfunction and the image data (files)
being transferred may be lost.
Never open the battery compartment/card cover, or connect or disconnect the AC
adapter while the camera is connected to a computer.
If the camera is connected to a computer via a USB hub, reliable operation
cannot be guaranteed. If a malfunction should occur, connect the camera directly
to the computer without using the USB hub.
Utilizing the images imported in a computer
Be sure to copy the images to the computer before editing the images using
graphic software. Depending on the application software used, editing images
(such as rotating) on the card may cause damage to the file data on the card.
If the image data cannot be transferred from the card in the camera connected
using the USB cable
Depending on the operating system of your computer, using an xD-Picture Card
adapter (sold separately) allows you to transfer the image data from the xD-Picture
Card to your computer. For details, see OLYMPUS homepage.
130
Installing OLYMPUS Master
Activating OLYMPUS Master
Saving pictures on computer
gP.132
gP.138
gP.140
gP.142
gP.143