Related Manuals for Hans Grohe Vivenis 80 75010 7 Series
Summary of Contents for Hans Grohe Vivenis 80 75010 7 Series
- Page 1 ZH 用户手册 / 组装说明 EN Instructions for use / Assembly instructions Vivenis 80 75010XX7 Vivenis 110 75020XX7 Vivenis 250 75043XX7 / 75046XX7...
- Page 2 中文 调节 (参见第页 7) 安全技巧 装配时为避免挤压和切割受伤, 必须戴上手套. 热水温度调节. 如果使用即热式喷头, 则不建议安 本产品只允许作为洗浴, 卫生和洁身之用. 装热水阀门. 冷热水管间过大的压力差必须予以平衡. 大小 (参见第页 9) 安装提示 流量示意图 (参见第页 9) • 安装前必须检查产品是否受到运输损害. 安装后 将不认可运输损害或表面损伤. 备用零件 (参见第页 12) • 管道和阀门必须根据通用标准进行安装, 冲洗和 XX = 颜色代码 检查. 00 = 镀铬 • 请遵守当地国家现行的安装规定. 14 = Brushed Bronze • 只能按规定使用溢流阀. 禁止将半露柱及其他部 34 = Brushed Black Chrome 件固定到溢流阀上. 67 = Matt Black 技术参数 70 = Matt White 99 = Polished Gold-Optic 1 MPa 工作压强: 最大...
-
Page 3: Safety Notes
English Adjustment (see page 7) Safety Notes Gloves should be worn during installation to prevent To adjust the hot water limiter. Using a hot water limiter in combination with a continuous flow water heater is not crushing and cutting injuries. The product may only be used for bathing, hygienic recommended. and body cleaning purposes. Dimensions (see page 9) The hot and cold supplies must be of equal pressures. Flow diagram (see page 9) Installation Instructions • Prior to installation, inspect the product for transport Spare parts (see page 12) damages. After it has been installed, no transport or XX = Colors surface damage will be honoured. 00 = Chrome Plated • The pipes and the fixture must be installed, flushed 14 = Brushed Bronze and tested as per the applicable standards. 34 = Brushed Black Chrome • The plumbing codes applicable in the respective 67 = Matt Black countries must be observed. - Page 4 (3 Nm) 58085000 SW 23 mm SW 9 mm (4 Nm) Armaturenfett Grease (max. 7 Nm)
- Page 5 58085000 Armaturenfett (max. Grease 7 Nm) (50 Ncm) SW 1,5 mm...
- Page 6 > 2 min SW 1,5 mm (0,3 Nm)
- Page 7 60 °C 10 °C 0,3 MPa SW 2,5 mm 36°C 60°C 38°C 55°C 43°C 50°C SW 2,5 mm (5 Nm)
- Page 9 Vivenis 80 Vivenis 110 Vivenis 250 75010XX7 75020XX7 75043XX7 /75046XX7 16 3 Ø Ø 13 3 G 1 / 2 G 1 / 2 G 1 / 2 50100000 50001XX0 Ø 6 3 Ø 6 3 Ø 4 0 Ø 4 0 94139XX7 94139000 Ø...
- Page 10 • • • • • Hansgrohe , Hansgrohe • • www.hansgrohe-int.com/guarantee. • • QuickClean QuickClean, • •...
-
Page 11: Warranty
English • After cleaning rinse thoroughly with clean water to Cleaning Recommendation for Hans- remove any cleaner residue. grohe Products • The use of steam cleaners is not permitted. The high Today, modern sanitary and kitchen tapware, showers, temperatures can damage the products. accessories, washstands, tubs and radiators consist of Important very different materials to comply with the needs of the... - Page 12 Vivenis 80 93735460 (Grey) 75010XX7 94277XX0 93735610 (Black) Vivenis 110 93735700 (White) 75020XX7 94027XX0 Vivenis 250 75043XX7 / 92114000 93995000 75046XX7 (35x1,5) (M37x1,5) 93897000 95008000 92604000 (35x2) 98186000 98750000 (30x2) 97443000 50001XX0 (450 mm) 92482000 96657XX0 (600 mm) 94139XX0 94139XX7 94275000 SW 1,5 mm (M3x4) 98749000 97548000 13961000 50100XX0 Hansgrohe · Auestraße 5 - 9 · D-77761 Schiltach · Telefon +49 (0) 78 36/51-1282 · Telefax +49 (0) 7836/511440 E-Mail: info@hansgrohe.com · Internet: www.hansgrohe.com...
Need help?
Do you have a question about the Vivenis 80 75010 7 Series and is the answer not in the manual?
Questions and answers