Making Connections; Connecting Your Pc Or Macintosh Computer - NEC NP901W User Manual

 Making Connections

Connecting Your PC or Macintosh Computer

NOTE: When using with a notebook PC, be sure to connect the projector and notebook PC while the projector is in standby mode
and before turning on the power to the notebook PC.
In most cases the output signal from the notebook PC is not turned on unless connected to the projector before being powered up.
* If the screen goes blank while using your remote control, it may be the result of the computer's screen-saver or power manage-
ment software.
Enabling the computer's external display
Displaying an image on the notebook PC's screen does not necessarily mean it outputs a signal to the projector.
When using a PC compatible laptop, a combination of function keys will enable/disable the external display.
Usually, the combination of the 'Fn" key along with one of the 12 function keys gets the external display to come on
or off. For example, NEC laptops use Fn + F3, while Dell laptops use Fn + F8 key combinations to toggle through
external display selections.
NOTE: The COMPUTER 1 IN and COMPUTER 2
IN connectors support Plug & Play (DDC2B).
NOTE: For older Macintosh, use a commercially
available pin adapter (not supplied) to connect to
your Mac's video port.
PHONE
• First turn off the computer and the projector before making connections.
• Turn down the volume on the computer before connecting an audio cable to the headphone jack of the com-
puter. After connecting the computer to the projector, you can adjust the sound level on the computer and the
projector to your preference.
• You are recommended to connect an audio cable to an audio out connector (mini jack type) if any.
NOTE: The NP905/NP901W is not compatible with video decoded outputs of either the NEC ISS-6020 or ISS-6010 switchers.
COMPUTER/COMPONENT 1 IN
USB ( LAN )
PHONE
Vga signal cable (supplied)
to mini d-sub 15-pin connector on the
projector. it is recommended that you
use a commercially available distribu-
tion amplifier if connecting a signal
cable longer than the one supplied.
2. Installation and Connections
COMPUTER/COMPONENT 2 IN
AUDIO IN
AUDIO IN
HDMI IN
LAN
USB
COMPUTER / COMPUTER /
S-VIDEO IN AUDIO IN COMPONENT 1 IN AUDIO IN COMPONENT 2 IN AUDIO IN
MONITOR OUT AUDIO OUT PC CONTROL
L/MONO R
VIDEO IN AUDIO IN
L/MONO R
audio cable (not supplied)
iBM Vga or Compatibles (notebook
type) or Macintosh (notebook type)
12
PHONE