Connecting An External Monitor - NEC NP901W User Manual

Connecting an External Monitor

audio cable (not supplied)
Vga signal cable (supplied)
You can connect a separate, external monitor to your projector to simultaneously view on a monitor the RGB analog
or component image you're projecting.
NOTE:
• Daisy chain connection is not possible.
• The MONITOR OUT connector will not output video and sound (Digital signal) via the HDMI IN connector.
• When audio equipment is connected, the projector speaker is disabled.
• When [NORMAL] is selected from [STANDBY MODE], the MONITOR OUT connector outputs the last displayed video signal and
the AUDIO OUT jack outputs the last audio signal. The sound level remains the same as the last one.
• Selecting [POWER-SAVING] in [STANDBY MODE] stops outputting a video signal from the MONITOR OUT connector during
standby mode. This causes the AUDIO OUT jack to stop outputting sound.
USB ( LAN )
LAN
USB
S-VIDEO IN AUDIO IN
L/MONO R
VIDEO IN AUDIO IN
L/MONO R
MONITOR OUT
PHONE
2. Installation and Connections
HDMI IN
COMPUTER / COMPUTER /
COMPONENT 1 IN AUDIO IN COMPONENT 2 IN AUDIO IN
MONITOR OUT AUDIO OUT PC CONTROL
AUDIO OUT
audio cable (not supplied)
Vga signal cable (not supplied)
14
AUDIO
IN