NEC NP901W User Manual page 119

[SECURITY] (required for wireless only)
SECURITY TYPE
Select encryption mode for secure transmission.
When [WEP] or [DISABLE] is selected in [SECURITY TYPE]:
Select this option whether using the WEP (Wired Equivalent Privacy) key for encryption or not. To use encryp-
tion, specify WEP key.
DISABLE ................ Will not turn on the encryption feature. Your communications may be monitored by someone.
WEP(64bit) ............ Uses 64-bit datalength for secure transmission.
WEP(128bit) .......... Uses 128-bit datalength for secure transmission. This option will increase privacy and security when
compared to use of 64-bit datalength encryption.
WPA-PSK, WPA-EAP, WPA2-PSK, WPA2-EAP
.............................. These options provide stronger security than WEP.
For setting, refer to "WPA Setting Guide" on the supplied User's Manual CD-ROM.
NOTE:
• The WEP settings must be the same as communication devices such as PC or access point in your wireless network.
• When you use WEP, your image transmission speed will slow down.
• [WPA-PSK], [WPA-EAP], [WPA2-PSK] and [WPA2-EAP] are not available when [AD HOC] is selected from [NETWORK
TYPE].
KEY SELECT:
Selects one WEP key from the four keys below when selecting [64bit] or [128bit] in [SECURITY TYPE].
KEY1-4:
Enter encryption key when selecting [64bit] or [128bit] in [SECURITY TYPE].
Up to 5 characters can be set in 64 bit, and up to 13 characters in 128 bit.
The key can also be set in hexadecimal digit.
Press the [HEX] button to change to [ASCII] to set the key in ASCII digit. You can toggle this button between [ASCII]
and [HEX].
* Enter 0x(numeral and alphabet respectively) right in front of your key code.
* Hexadecimal uses 0 to 9 and A to F.
* When setting in a hexadecimal digit, up to 10 characters can be set in 64 bit, and up to 26 characters in 128
bit.
105
6. Using On-Screen Menu