Mitsubishi Electric XD560U User Manual page 45

Advanced display utilities (continued)
Displaying with AutoRun function
5. Create an "AUTORUN" folder in the root directory
of the USB device using a computer or other.
6. Save a PtG file or JPEG files in the AUTORUN
folder.
Important:
• The AutoRun function supports single PtG file
only. The first PtG file is played if multiple PtG
files exists in AUTORUN folder.
7. Connect the USB device to the USB-A terminal.
• The files specified by the AutoRun setting (PtG
or Photo) are played back automatically.
8. Press the ENTER to start or pause the playback.
9. Press the  , or  button to change the file to be
played back.
•  button: to previous page/previous file
•  button: to next page/next file
•  button: to next pause/next file
10. Press the  button to quit the AutoRun display.
• The screen goes back to the file selection
screen.
Displaying with slideshow function
5. Press the  or  button on the remote control
to select Presentation to Go or Photo Viewer and
press the ENTER button .
• The file selection screen appears.
6. Press the  or  button to select a file or folder
you want to display and press the ENTER button .
• If you select a folder, the underlying file names
are displayed. Then, select a file.
• When a PtG file is selected, the file is displayed
with the slideshow.
• When a JPEG file is selected, all the files in
the same folder as the JPEG file exists are
displayed with the slideshow.
7. Press the ENTER to start or pause the playback.
8. Press the  , or  button to change the file to be
played back.
•  button: to previous page/previous file
•  button: to next page/next file
•  button: to next pause/next file
9. Press the  button to quit the slideshow.
• The screen goes back to the file selection
screen.
Ending the PC Less Presentation
Unplug the USB device from the projector. Before
unplugging, be sure to press the UNPLUG button on
the remote control and select [Yes] on the screen by
pressing the  or  button and then ENTER button.
EN-45