Mitsubishi Electric XD560U User Manual page 44

Advanced display utilities (continued)
Setting up
2. Press the  or  button on the remote control to
select Setup and press the ENTER button .
• The Setup screen appears.
3. Press the  or  button to select a setting item
and press the  or  button to change the setting.
• AutoRun:
Enables or disables the AutoRun and slideshow
function.
AutoRun
OFF Disables.
PtG Enables for PtG
files.
Photo Enables for JPEG
files.
• Interval:
Sets the interval for PtG pause mark or photo
slideshow to 5/10/30/60/300 seconds.
• Repeat:
Enables or disables the repeat execution of
AutoRun and slideshow function for photo files
and PtG file.
• Sorting:
Sets the file sorting rule to File Name
(Ascending), File Name (Descending), Time (New
to Old) or Time (Old to New)
4. To return to the Presentation to Go screen, press
the ENTER button.
Slideshow
Disables.
Enables for all
files.
Enables for all
files.
EN-44
Displaying PtG file
5. Press the  or  button on the remote control to
select Presentation to Go and press the ENTER
button .
• The file selection screen appears.
6. Press the  or  button to select a file or folder
you want to display and press the ENTER button .
• If you select a folder, the underlying file names
are displayed. Then, select a file.
• An image on page 1 is displayed on the screen.
7. Change the page by pressing the  , or 
button.
•  button: to previous page
•  button: to next page
•  button: to next pause
8. Press the  button to quit the display.
• The screen goes back to the file selection
screen.
Displaying JPEG file
5. Press the  or  button on the remote control to
select Photo Viewer and press the ENTER button .
• The file selection screen appears.
6. Press the  or  button to select a file or folder
you want to display and press the ENTER button .
• If you select a folder, the underlying file names
are displayed. Then, select a file.
• The image of the selected file is displayed on
the screen.
7. Change the file by pressing the  , or  button.
•  button: to previous file
•  button: to next file
•  button: to next file
8. Press the  button to quit the display.
• The screen goes back to the file selection
screen.