Mitsubishi Electric XD560U User Manual page 41

Advanced display utilities (continued)
Important:
• Virtual display function is only supported by
Windows XP.
• To project a virtual extended screen, the
attached Virtual display driver must be
installed.
• Hide UI
Hides or displays the main user interface.
• About
Displays the version information of the LAN
Display System.
• Exit
Exits the LAN Display System.
Ending the LAN Display projection
5. Click the Exit button on the main user interface or
the menu window to exit the LAN Display System.
6. In case of the wireless LAN communication,
unplug the USB memory from the projector. Before
unplugging, be sure to press the UNPLUG button
on the remote control and select [Yes] on the
screen by pressing the  or  button and then
ENTER button.
Using remote desktop
Connect an USB device such as a mouse or keyboard
to the USB-A terminal on the projector. While the
computer images are projected with the LAN Display,
the computer can be operated with the device.
AUDIO AUDIO IN-3L S-VIDEO SERIAL
IN-1
AUDIO OUT
AUDIO
IN-2
AUDIO IN-3R
MONITOR OUT
VIDEO
AC IN
One of the USB devices can be connected.
COMPUTER / COMPONENT VIDEO
USB-A LAN
USB-B
IN-1
IN-2
To USB-A
terminal
Installing the virtual display driver
To project a virtual extended screen, install the Virtual
display driver as follows.
1. Double click "Virtual display driver.exe" contained
in the folder "LAN Display System", and start up
the installer of the Virtual display driver.
2. The Setup window is displayed. Click [Next]
and operate according to the instructions on the
window.
3. When the installation has been completed, restart
the computer.
Important:
• Do not switch the input source to USB Display
or PC Less Presentation during the wireless LAN
communication. If switched, the communication
will be disconnected.
• When the image is projected, the computer
resolution will be changed to WXGA/XGA according
to the projector model and will be automatically
recovered after unplugging the USB cable.
• During wireless LAN communication, the projector
cannot communicate with the access point.
• Only infrastructure mode is available to wireless
LAN communication. Adhoc mode is not available.
EN-41