Warnings And Cautions - Conroy Qseal auto Operator's Manual

Warnings and Cautions

The general safety information in the manual is for operating personnel. Specific
notes, cautions and warnings are found throughout the manual where applicable.
Please read the Operator's manual carefully before use.
Note! Identifies conditions that should be noted carefully.
Caution! Identifies conditions that could result in damage to the equipment.
Warning! Identifies conditions that could result in personal injury or loss of life.
Warning! Qseal-auto must be used in compliance with all specifications and operational
procedures listed in this manual.
Warning! When in use, Qseal-auto must be used under the control of trained personnel.
Warning! Follow the operating instructions while operating Qseal-auto.
Warning! Cables and accessories, others than those specified, may result in increased
emission or decreased immunity of the equipment or system. Only acces-
sories designed for use with Qseal-auto should be used.
Warning! The equipment or system should not be used adjacent to or stacked with
other equipment. If adjacent or stacked use is necessary, the equipment or
system should be observed to verify normal operation in the configuration
in which it will be used.
Warning! If any of the components of Qseal-auto are exposed to blood, they must be
cleaned with an appropriate disinfectant solution.
Warning! The instrument must always be connected to a grounded outlet and with
appropriate alternating current mains source, 100-130 or 230V~.
Warning! Disconnect the device from power source before performing any mainte-
nance and cleaning procedure.
2
CS524 Qseal-auto Operator´s manual