MSI 482 User Manual page 67

Suspend Time Out (M inute)
If system activity is not detected for the length of time specified in this field, all
devices except CPU will be shut off. Settings: [Disabled], [1 minute], [2 minutes],[3
minutes], [4 minutes], [5 minutes], [10 minutes], [15 minutes], [32 minutes], [64 minutes].
Power Button Function
This feature allows users to configure the Power Button function. Settings are:
[Power Off]
[Suspend]
Restore on AC/Power Loss
This setting specifies whether your system will reboot after a power failure or
interrupt occurs. Available settings are:
[Off]
[On]
[Last State]
Wakeup Event Setup
Press <Enter> to enter sub-menu and the following screen appears.
Resume From S3 by USB Device
The item allows the activity of the USB device to wake up the system from S3
(Suspend to RAM) sleep state. Setting options: [Disabled], [Enabled].
Resume By PS/2 Keyboard
The item specifies how the system will be awakened from power saving mode
when input signal of the PS2 keyboard is detected. Use the <PageUp> &
<PageDown> keys to select the options. W hen selecting [Password], enter the
desired password. Setting options: [Password], [Any Key], [Disabled].
Key board Password
If Resume By PS/2 Keyboard is set to Password, then you can set a pass-
word in the field for the PS/2 keyboard to power on the system.
The power button functions as a normal power-on/-off
button.
W hen you press the power button, the computer enters
the suspend/sleep mode, but if the button is pressed for
more than four seconds, the computer is turned off.
Leaves the computer in the power off state.
Leaves the computer in the power on state.
Restores the system to the previous status before power
failure or interrupt occurred.
4-16