Front Panel Audio Connector: Jaud1 - MSI K8T Neo2-F User Manual

MSI Reminds You...
Please do not fold the serial ATA cable in a 90-degree angle, since this will
cause the loss of data during the transmission.
Optional Power Cable
Connect to the Power Supply

Front Panel Audio Connector: JAUD1

The JAUD1 front panel audio connector allows you to connect to the front panel
audio and is compliant with Intel
PIN
1
2
JAUD1
3
10
2
4
1
9
5
6
7
8
9
10
MSI Reminds You...
If you don't want to connect to the front audio header,
pins 5 & 6, 9 & 10 have to be jumpered in order to have
signal output directed to the rear audio ports. Otherwise,
the Line-Out connector on the back panel will not
function.
®
Front Panel I/O Connectivity Design Guide.
Pin Definition
SIGNAL DESCRIPTION
AUD_MIC Front panel microphone input signal
AUD_GND Ground used by analog audio circuits
AUD_MIC_BIAS Microphone power
AUD_VCC Filtered +5V used by analog audio circuits
AUD_FPOUT_R Right channel audio signal to front panel
AUD_RET_R Right channel audio signal return from front panel
HP_ON Reserved for future use to control headphone amplifier
KEY No pin
AUD_FPOUT_L Left channel audio signal to front panel
AUD_RET_L Left channel audio signal return from front panel
Hardware Setup
Connect to your hard disk
which do not have any power
connector on it.
6
5
10
9
2-19