Using 2-, 4-, 6- & 8- Channel Audio Function - MSI K8N Diamond User Manual

M S-7100 ATX M ainboard
Using 2-, 4-, 6- & 8- Channel Audio Function
Connecting the Speakers
W hen you have set the Multi-Channel Audio Function mode properly in the software
utility, connect your speakers to the correct phone jacks in accordance with the
setting in software utility.
n 2-Channel M ode for Stereo-Speaker Output
Refer to the following diagram and caption for the function of each phone jack on the
back panel when 2-Channel Mode is selected.
Back Panel
1 Line In/ Side Surround Out (Side channels, but not function on this mode)
2 Line Out (Front channels)
3 MIC
4 Line Out (Rear channels, but no functioning in this mode)
5 Line Out (Center and Subwoofer channel, but no functioning in this mode)
6 S/PDIF Out-Optical
7 S/PDIF Out-Coaxial
5 - 2
7
1
2
3
4
5
6