Table of Contents
Advertisement
M S-7276 M ainboard
Connectors
Floppy Disk Drive Connector: FDD1
This standard FDD connector supports 360K, 720K, 1.2M, 1.44M and 2.88M floppy
disk types.
Hard Disk Connector: IDE1 (optional)
The mainboard provides a USB to IDE connector that supports Ultra DMA 66 function.
You can connect hard disk drives, CD-ROM drives and other IDE devices.
Note: Due to Full Speed USB bandwidth is limited to 480M b/s (60MB/s), this
IDE port can not support Ultra DM A 100 interface devices.
Important
- If you install two hard disks on cable, you must configure the second drive
to Slave mode by setting its jumper. Refer to the hard disk documentation
supplied by hard disk vendors for jumper setting instruction.
- A hard drive connected to this IDE connector does not support OS
installation. Furthermore, a system hard drive connected to this IDE con-
nector can not be booted up to OS. We strongly recommend you install the
Optical Disk Drive device to this IDE connector.
2-12
IDE1
IDE can connect a Master and a Slave drive. You must config-
ure the second hard drive to Slave mode by setting the jumper
accordingly.
FDD1
Hide quick links:
Advertisement
Table of Contents
