Integrated Peripherals
USB 2.0 Controller
This setting allows you to enable/disable the onboard USB controller.
USB Device Legacy Support
Select [Enabled] if you need to use a USB-interfaced device in the operating system.
USB 2.0 Controller Mode
This setting allows you to select the USB controller mode.
BIOS EHCI Hand-Off
This item can used to stop the EHCI legacy for operations systems without EHCI
hand-off mechanism loading properly. Setting it to "Disabled" to force EHCI owner-
ship change Rely on EHCI driver.
GbE Controller
This setting allows you to enable/disable the onboard GbE(Gigabit Ethernet) controller.
GbE LAN Boot
This setting allows you to enable/disable the network boot function.
Onboard 1394
This item allows you to enable/disable the onboard IEEE1394 controller.
BIOS Setup
3-13