Table of Contents
Advertisement
M S-7033 M -ATX M ainboard
Install Driver in Windows XP/2000
Before installing the OS, please copy MS-7033 VT6410 floppy driver path (in
your M SI Driver/Utility CD of the package) \IDE\VIA\Floppy\driver to your
floppy. Then your floppy will include \PIDE\ and \RAID\ folders and TXTSETUP.
OEM files.
†
New Windows XP/2000 Installation
The following details the installation of the drivers while installing W indows XP.
1. Start the installation:
Boot from the CD-ROM. Press F6 when the message "Press F6 if you need
to install third party SCSI or RAID driver" appears.
2. W hen the W indows Setup window is generated, press S to specify an
Additional Device(s).
3. Insert the driver diskette Intel ICH6/VIA VT6410 Disk Driver into drive A:
and press <Enter>.
4. Depending on your operation system, choose the driver VIA RAID Controller
(Windows XP), VIA RAID Controller (Windows 2000) which matches to
your OS.
5. Press <Enter> to continue with installation or if you need to specify any
additional devices to be installed, do so at this time. Once all devices are
specified, press <Enter> to continue with installation.
6. From the W indows XP/2000 Setup screen, press the <Enter> key. Setup will
now load all device files and then continue the W indows XP installation
†
Existing Windows XP/2000 Driver Installation
1. Insert the MSI CD into the CD-ROM drive.
2. The CD will auto-run and the setup screen will appear.
3. Under the Driver tab, click on VIA IDE RAID Drivers.
4. The drivers will be automatically installed.
†
Confirming Windows XP/2000 Driver Installation
1. From W indows XP/2000, open the Control Panel from My Computer
followed by the System icon.
2. Choose the Hardware tab, then click the Device M anager tab.
3. Click the "+" in front of the SCSI and RAID Controllers hardware type. The
driver VIA VT6410 RAID Controller should appear.
4-14
Installing Software
Hide quick links:
Advertisement
Table of Contents
