Table of Contents
Advertisement
M S-7033 M -ATX M ainboard
The mainboard provides connectors to connect to FDD, IDE HDD, case, LAN,
USB Ports, IR module and CPU/System FAN.
Floppy Disk Drive Connector: FDD1
The mainboard provides a standard floppy disk drive connector that supports
360K, 720K, 1.2M, 1.44M and 2.88M floppy disk types.
Fan Power Connectors: CPU_FAN1 CPU_FAN2/SYS_FAN1
The CPU_FAN1 CPU_FAN2 (processor fan) and SYS_FAN1 (system fan1)
support system cooling fan with +12V. It supports four/three-pin head connector.
W hen connecting the wire to the connectors, always take note that the red wire is
the positive and should be connected to the +12V, the black wire is Ground and
should be connected to GND. If the mainboard has a System Hardware Monitor
chipset on-board, you must use a specially designed fan with speed sensor to take
advantage of the CPU fan control.
MSI Reminds You...
1. Always consult the vendors for proper CPU cooling fan.
2. CPUFAN2 supports the fan control. Fan/heatsink with 3 or 4 fins
are both available. Meanwhile, you can install Core Center util-
ity (refer to Chapter 4 for details) that will automatically control
the CPU fan speed according to the actual CPU temperature.
3. Please refer to the recommended CPU fans at Intel
2-14
Connectors
Control
SENSOR
+12V
GND
SYSFAN1
CPU_FAN1
CPU_FAN2
FDD1
GND
+12V
Sensor
®
official website.
Hide quick links:
Advertisement
Table of Contents
