Cd-In Connector: Jcd1; D-Bracket™ 2 Connector: Jled1 - MSI 875P Neo-FIS2R User Manual

MS-6758 ATX Mainboard

CD-In Connector: JCD1

The connector is for CD-ROM audio connector.
D-Bracket™ 2 Connector: JLED1
The mainboard comes with a JLED1 connector for you to connect to D-
Bracket™ 2. D-Bracket™ 2 is a USB Bracket that supports both USB1.1 & 2.0
spec. It integrates four LEDs and allows users to identify system problem
through 16 various combinations of LED signals. For definitions of 16 signal
combinations, please refer to D-Bracket™ 2 at P.1-10 in Chapter 1.
2
1
Connected to JLED1
2-20
JCD1
R
L
GND
10
JLED1
9
Connected to JUSB2 or JUSB3
JLED1 Pin Definition
Pin Signal
1 DBG1 (high for green color)
2 DBR1 (high for red color)
3 DBG2 (high for green color)
4 DBR2 (high for red color)
5 DBG3 (high for green color)
6 DBR3 (high for red color)
7 DBG4 (high for green color)
8 DBR4 (high for red color)
9 Key (no pin)
10 NC
LEDs