Main
System Time (hh:mm:ss)
The time format is <Hour> <Minute> <Second>.
System Date (mm:dd:yy)
The date format is <Month> <Date> <Year>.
Legacy Diskette A
This setting allows you to set the type of floppy drives installed.
IDE Channel 0 Master/Slave, SATA Port 1/2/3/4
[Type]
[Multi-Sector Transfers]
[LBA Mode Control]
[32-Bit I/O]
Press <+> or <-> to select [Manual], [None] or
[Auto] type. Note that the specifications of
your drive must match with the drive table.
The hard disk will not work properly if you
enter improper information for this category.
If your hard disk drive type is not matched or
listed, you can use [Manual] to define your
own drive type manually.
Any selection except Disabled determines
the number of sectors transferred per block
Enabling LBA causes Logical Block Ad-
dressing to be used in place of Cylinders,
Heads and Sectors
Enables 32-bit communication between
CPU and IDE card
BIOS Setup
3-5