Cpu (Central Processing Unit) - MSI 5000P Master2 Series User Manual

CPU (Central Processing Unit)

The mainboard supports Intel
processors in Socket LGA771. W hen you are installing the CPU, make sure the
CPU has a heat sink and a cooling fan attached on the top to prevent
overheating. If you do not have the heat sink and cooling fan, contact your dealer to
purchase and install them before turning on the computer.
For more information on compatible components, please visit http://www.msi.com.
tw/program/products/server/svr/pro_svr_qvl.php .
Important
1. Overheating will seriously damage the CPU and system. Always make
sure the cooling fan can work properly to protect the CPU from overheating.
2. Make sure that you apply an even layer of heat sink paste (or thermal tape)
between the CPU and the heatsink to enhance heat dissipation.
3. While replacing the CPU, always turn off the power supply or unplug the
power supply's power cord from the grounded outlet first to ensure the
safety of CPU.
Introduction to LGA 771 CPU
The pin-pad side of LGA 771 CPU.
Alignment Key
Yellow triangle is the Pin 1 indicator
®
Dempsey/ Woodcrest/ Clovertown/ Harpertown
The surface of LGA 771 CPU.
Remember to apply some silicone
heat transfer compound on it for
better heat dispersion.
Yellow triangle is the Pin 1 indicator
Hardware Setup
Alignment Key
2-3