Table of Contents
Advertisement
Wakeup Event Detect
Press <Enter> to enter sub-menu and the following screen appears:
PS2KB Wakeup Key select
The item specifies how the system will be awakened from power saving mode
when input signal of the keyboard is detected.
PowerOn by PCI Card
This controls how and whether the system can be powered on by the devices
installed on PCI slots. Setting options: [Disabled], [Enabled].
Wake Up On Ring
These fields specify whether the system will be awakened from power sav-
ing modes when activity or input signal of the specified hardware peripheral or
component is detected.
Important
You need to install a modem card supporting power on function for
"Wake Up On Ring" function.
RTC Alarm Resume
This is used to enable or disable the feature of booting up the system on a scheduled
time/date from the S3, S4, and S5 power off state. Setting options: [Disabled], [Enabled].
Date (of Month)
The field specifies the date for RTC Alarm Resume. Settings: [0]~[31].
Resume T ime (hh:mm:ss)
The field specifies the time for RTC Alarm Resume. Format is <hour><minute><second>.
BIOS Setup
4-21
Advertisement
Table of Contents
