4-Port SSL/IPSec VPN Router
Wall-Mount Option
The Router is shown with two slots on the bottom. The horizontal distance between the two holes is 64.4 mm
(2.535 inches).
The Router has two wall-mount slots on its bottom panel.
1. Determine where you want to mount the Router.
2. Drill two holes into the wall. Make sure the holes are 64.4 mm (2.535 inches) apart.
3. Insert a screw into each hole, and leave 5 mm (0.2 inches) of its head exposed.
4. Maneuver the Router so the wall-mount slots line up with the two screws.
Figure B-2: Suggested Mounting Hardware
5. Place the wall-mount slots over the screws and slide the Router down until the screws fit snugly into the wall-
mount slots.
NOTE: These diagrams are not to scale.
Figure B-3: Wall-Mounting the Router
Appendix B: Physical Setup of the Router
92
Placement Options