Wall-Mounting Placement - Linksys X6200 User Manual

Wall-mounting placement

The router has two wall-mount slots on its bottom panel. The distance between the slots is
75 .6 mm. Two screws are needed to mount the router.
Note—Linksys is not responsible for damages incurred by unsecured wall- mounting
hardware.
To mount the modem router:
1. Determine where you want to mount the router. Make sure that the wall you use is
smooth, flat, dry, and sturdy. Also make sure the location is within reach of an
electrical outlet.
2. Drill two holes into the wall. Make sure the holes are 75 .6 mm apart.
3. Insert a screw into each hole and leave 3 mm of its head exposed.
4. Position the router so the wall-mount slots line up with the two screws.
5. Place the wall-mount slots over the screws and slide the router down until the
screws fit snugly into the wall-mount slots.
Wall-mounting template
Print this page at 100% size.
Cut along the dotted line, and place on the wall to drill precise spacing.
5