Hardware Setup - Linksys WRT54GL Quick Install Manual

Hardware Setup

After removing the Routers from their packaging and placing them in a suitable lo-
cation, you are ready to plug them in. The Sharedband Routers can be set up in two
configurations.
The recommended setup is to connect the
Routers together via an unmanaged switch.
After connecting the Sharedband Routers together the next step is to connect them
to the modems. This is done with an Ethernet cable found in the box for each
Router.
With the Routers connected together and to the modems they are ready to be
turned on. Plug the power lead into the back of the Router and into the nearest
power outlet.
Linksys WRT54GL QIG
Or plug all Sharedband Routers together with
an Ethernet cable.
2 www.sharedband.com