Using The Automatic Programs; Using The Automatic Programme "Cakes - privileg AC925BVE-S0EE User Manual

Before getting started
• Remove all packaging and weigh the dish.
The weight is required to ensure the cor-
rect settings.
Using the automatic
programs
Example:
You would like to cook 350 g vegetables.
1. Turn the control dial (17) clockwise until
the indicator starts to flash on the dis-
A 4
play (12) and the indicators
visible.
2. Press the "Start/+30 sec./Confirm" but-
ton (16).
The indicator stops flashing.
A4
3. Turn the control dial clockwise (17) again
until the indicator
350
play (12).
4. Press the "Start /+30 sec./Confirm" but-
ton (16).
The cooking will start; the display (12) will
count the remaining cooking time down in
second intervals, and the displays
flash.
Once the cooking time has elapsed, 5 sig-
nal tones will sound.
and are
g appears on the dis-
and
Automatic programmes
Using the automatic
programme "Cakes"
The automatic programme "Cakes" (
special as it works with a preheating function
and the cooking chamber door (1) must be
opened after preheating.
1. Turn the control dial (17) clockwise until
the indicator starts to flash on the dis-
A 8
play (12), under the
8
the indicators and
2. Press the "Start/+30 sec./Confirm" but-
ton (16).
The indicator stops flashing.
A8
3. Press the "Start/+30 sec./Confirm" but-
ton (16) again.
Preheating starts. The indicators
and the bar beneath the
flash.
During the preheating, all bars will start
gradually to illuminate at the bottom of the
display up to the 180 °C bar, starting on the
left. This shows the progress of the pre-
heating.
Once the temperature has been reached,
2 signal tones will sound.
4. Place the dish in the cooking chamber (1)
and put the cake into the cooking chamber.
Page EN-29
) is
A 8
a bar appears, and
are visible.
and
will start to
8