Elite Screens TE150HR3-DUAL User Manual

CineTension 3 Series
Tab-tensioned Electric Motorized Projection Screen
Important Safety & Warning Precautions
Make sure to read this user's guide and follow the procedures below.
Caution: The screen's Black Top Drop is already set to its maximum drop distance. There is NO extra Black Top
Drop in the roller. Please be aware of this as it will void your warranty with Elite Screens. Unapproved changes or
modifications (except for cutting the power cord for hardwire installations) to this unit are prohibited and will void
your warranty. For more information, please contact our Technical Support Department.
•
Please retain this user's guide for future reference.
•
To avoid damaging the unit, do not use with any unauthorized accessories not recommended by the supplier.
•
Handle the unit carefully during transportation to avoid any damages.
•
To ensure safe and reliable operation, direct connection to a properly grounded power source is advised.
•
The power outlet supplying power to the unit should be close to the unit and easily accessible.
•
Do not install the unit on uneven, inclined surfaces;
•
Do not install in damp places to avoid an electric shock or short circuit.
•
Do not place any heavy objects over the power cord.
•
Position the power cord properly to avoid creating a trip obstacle.
•
To avoid an electrical shock or fire, due to a loose contact or short circuit, do not overload the power cord.
•
The internal & external parts of this unit are not end user serviceable. Do not attempt to disassemble this
unit by yourself. No one except authorized technicians can open and make repairs to this unit.
•
Make sure the power source that this unit is connected to has a continuous power flow.
•
If there is need to use an extension cord, make sure the cord has an equal rating as the appliance to avoid
over heat.
•
Do not handle the power plug when your hands are wet or your feet are in contact with water.
•
Properly dispose of this equipment according to the environmental regulations in your area when product is
no longer of service.
Do not use this unit under the following circumstances.
•
Disconnect the power cord under the conditions of heavy rain, wind thunder or lightning.
•
Avoid direct sun light, rain shower and moisture.
•
Keep away from fire sources and high temperature to prevent this device from overheating.
•
Cut off the power supply first before transportation or maintenance.
•
To avoid possible injury and/or an electric shock, do not attempt to use this screen if there is obvious damage
or if there are any evident broken parts.
Installation Warning
Rev. V012324KP (DS8621)
User's Guide – E/H type (RC1)
V1.0
1 www.elitescreens.com