Subscribe to Our Youtube Channel
Related Manuals for LENCO LBT-188 V2
Summary of Contents for LENCO LBT-188 V2
- Page 1 Model: LBT-188 (V2) / LBT-189 / LBT-288 User manual Turntable with bluetooth transmission...
-
Page 2: Precautions Before Use
English CAUTION: Usage of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. PRECAUTIONS BEFORE USE KEEP THESE INSTRUCTIONS IN MIND: Do not cover or block any ventilation openings. When placing the device on a shelf, leave 5 cm (2”) free space around the whole device. - Page 3 10. Although this device is manufactured with the utmost care and checked several times before leaving the factory, it is still possible that problems may occur, as with all electrical appliances. If you notice smoke, an excessive build-up of heat or any other unexpected phenomena, you should disconnect the plug from the main power socket immediately.
- Page 4 25. Refer all servicing to qualified service personnel. Servicing is required when the device has been damaged in any way, such as the power supply cord or the plug, when liquid has been spilled or objects have fallen into the device, when the device has been exposed to rain or moisture, does not operate normally, or has been dropped.
-
Page 5: Installation
⚫ If the battery compartment does not close securely, stop using the product and keep it away from children. ⚫ If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention. 29. - Page 6 COMPONENTS, FEATURES AND CONNECTIONS Power & Bluetooth indicator Power button Counterweight Anti-skating Stub Turntable Platter Tonearm lift lever Tonearm rest 33/45 selector Tonearm 10. Stop/Start knob 11. Cartridge 12. Lid 17. Anti-skating Weight 13. Lid Hinge 18. USB-PC port 14. Ground Connector 19.
- Page 7 Please check thoroughly and make sure you find the following items that come along with this package: 1) Unit 7) Instruction Manual 2) Adaptor with EU-UK plug-end 8) Cartridge Alignment Protractor 3) Counterweight 9) USB-PC Cable 4) Platter with Belt 10) 2pcs lid spare rubber 5) 45 RPM Adaptor 11) Anti-skating Weight...
- Page 8 motor spins. If the platter does not spin, try the steps listed above again. Cartridge Down force Adjustment The Counterweight supplied is suitable for cartridges weighing between 3.0-6.0g. - Gently push and turn the Counterweight onto the rear of the tonearm (with the scale facing toward the front of the turntable).
- Page 9 - Rotate the counterweight counter clockwise (seen from the front) to adjust the down force according to the cartridge manufacturer’s recommendations. One mark on the scale represents 0.05g of down force. NOTE: The recommended down force for the factory fitted cartridge is 3.0±0.5g.
- Page 10 Pull the anti-skating weight slightly to let the tie of the fishing line move to the stub. Lift the anti-skating weight over the anti-skating weight wire support. The anti-skating weight should now be dangling in free space to the left of support.
- Page 11 3 - 3.5g " " " 3.5 - 4g 4 th " " " Slip the loop of the anti-skating weight's thread over the 3rd groove of the stub to set the correct anti-skating force for the factory-fitted cartridge. Feed the thread through the loop of the wire support.
- Page 12 Main Power Connection The power adaptor is in the foam packing material. Unpack the power adaptor and plug the small end into the DC power jack located at the back side of the turntable. Plug the power adaptor into your power outlet. Operation Turntable Operation Connect the included power adapter to unit and...
- Page 13 first light to RED and then will flash in blue during Bluetooth searching of the external speaker or headphone. Note: if you want to disable the Bluetooth searching function you can press the Power button for 3 seconds, then the Led light indicator will light to RED. When pairing, the Blue LED light will flash twice per second, then change to be long Lighting Blue when paired;...
- Page 14 5. Select Preference from the Edit tab in the Audacity Menu. 6. Select Audio I/O tab at the top left. Under Playback, Device, select your internal sound card. Under Recording, Device, select USB Audio CODEC. Under Recording, Channels, select 2 (Stereo). ...
- Page 15 1. Saving a project Audacity writes all the changed and recorded audio to a directory called Projectname_data, which is located right where you saved the project file itself. Thus, select Save Project as from your Audacity File tab and choose a location and filename for your project.
- Page 16 Lower tone arm on USB turntable onto album and track you want to record. Click on the blue Pause button to pause the recording. Press it again to continue. Click on the yellow Stop button. That's it. You can now play around with your recording and explore the editing capabilities of Audacity.
- Page 17 Useful Tips The turntable should be positioned on a low-resonance surface such as wood or multiple layer ply board to avoid structural vibrations disturbing playback. Cartridge Replacement Before replacement, put the stylus protector back on the stylus to prevent damage to the stylus during the replacement process. Carefully remove the wire leads from the original cartridge.
- Page 18 NOTE: If you are unfamiliar or uncomfortable with completing this procedure, we recommend consulting with a professional to perform the installation. Technical Specifications: Nominal Speeds 33 1/3 & 45RPM Speed Variance ±1% Wow and Flutter ≤0.15% Signal to Noise 55dB Down force Range 3.0-6.0g Effective Tonearm Length...
- Page 19 occur are not necessarily due to material or production faults but can sometimes be caused by incorrect use or unfortunate circumstances. Therefore the following list of common fault symptoms is included. The platter doesn’t turn although the unit is switched on: - The unit is not connected to the main power supply.
- Page 20 Remark: Due to the ErP Stage 2 requirements for power saving measures, a unit which is connected to the mains power will switch itself to standby mode automatically if no music has been playing for about 20 minutes. If your unit switches off regularly, this is no defect. Power supply adaptor Manufacturer: BRIGHTPOWER OPTOELECTRONIC TECHNOLOGY CO., LTD Model number: SW1200500-FM...
-
Page 21: Declaration Of Conformity
Electronic Equipment Directive). DECLARATION OF CONFORMITY Hereby, Commaxx declares that the radio equipment type [Lenco LBT-188 (V2) / LBT-189 / LBT-288] is in compliance with directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://commaxx-certificates.com/doc/lbt-188_doc.pdf... - Page 22 Service For more information and helpdesk support, please visit www.lenco.com Commaxx B.V. Wiebachstraat 37, 6466 NG, Kerkrade, The Netherlands.
Need help?
Do you have a question about the LBT-188 V2 and is the answer not in the manual?
Questions and answers