Our products and user manuals are subject to a process of continuous development. We there‐ fore reserve the right to make changes without notice. Please refer to the latest version of the user manual which is ready for download under www.thomann.de. USB PartyPar 6 RGB...
General information 1.1 Further information On our website (www.thomann.de) you will find lots of further information and details on the following points: Download This manual is also available as PDF file for you to download. Use the search function in the electronic version to find the topics of Keyword search interest for you quickly.
General information Letterings The letterings for connectors and controls are marked by square brackets and italics. Examples: [VOLUME] control, [Mono] button. 1.3 Symbols and signal words In this section you will find an overview of the meaning of symbols and signal words that are used in this manual.
Page 8
General information Warning signs Type of danger Warning – high-voltage. Warning – dangerous optical radiation. Warning – suspended load. Warning – danger zone. USB PartyPar 6 RGB LED PAR...
Safety instructions Safety instructions Intended use This device is intended for use as an electronic lighting effect by means of LED technology. The device is designed for professional use only and is not suitable for use in households. Use the device only as described in this user manual.
Page 10
Safety instructions DANGER! Danger to life due to electric current! Within the device there are areas where high voltages may be present. Never remove any covers. There are no user-serviceable parts inside. Do not use the device when covers, safety equipment or optical components are missing or damaged. WARNING! Risk of eye damage caused by high light intensity! The device generates highly intense light radiation.
Features Features Special features of the device: Decoration LED spotlight with RGB colour mixing (6 × 3 W RGB LED) Three operating modes: Sound control, fade programme or automatic programme sequence USB-C port for power supply, can be operated with a power bank or the power supply pro‐ vided Compact dimensions and low weight Ideally suitable for use in party rooms...
Installation Installation Unpack and check carefully there is no transportation damage before using the unit. Keep the equipment packaging. To fully protect the product against vibration, dust and moisture during transportation or storage use the original packaging or your own packaging material suitable for transport or storage, respectively.
Page 13
Installation NOTICE! Risk of overheating The distance between light output and the illuminated surface must be more than 1.5 m (19.7in). Provide sufficient ventilation. The ambient temperature must always be below 40 °C (104 °F). NOTICE! Use of stands When mounting the device onto a stand, ensure that the stand is in a safe and stable position and that the weight of the device does not exceed the maximum permissible load capacity of the stand.
Page 14
Installation Please note that this device must not be connected to a dimmer. USB PartyPar 6 RGB LED PAR...
Starting up Starting up Unpack and check carefully there is no transportation damage before using the unit. Keep the equipment packaging. To fully protect the product against vibration, dust and moisture during transportation or storage use the original packaging or your own packaging material suitable for transport or storage, respectively.
Connections and controls Connections and controls FADE SOUND ö 1 Bracket 2 Locking screw for the bracket. 3 Button to set the three operating modes [SOUND] (sound control), [FADE] (fade programme) or [AUTO] (automatic programme sequence) 4 USB-C port for the power supply (power bank or power supply) USB PartyPar 6 RGB LED PAR...
Operating Operating Use the button on the back of the unit to set the desired operating mode. Operating mode [AUTO] Automatic programme sequence: 25 seconds colour change, 15 seconds fade colour change. Operating mode [SOUND] Sound control: Colour change on audio signal. If there is no audio signal for 3 seconds, the automatic programme sequence is activated.
Technical specifications Technical specifications Light source 6 × RGB ED, 3 W Control Switch on the back of the device Input connections Power supply USB-C port for connecting a power bank or a power supply Power consumption 130 mm Power supply External power adapter, 100 - 240 V 50/60 Hz 50 mm...
Page 19
Technical specifications Further information Design Flat PAR Colour mixture LED type x-in-1 Floor housing Fanless Remote control Not possible Wireless DMX Housing colour Black USB PartyPar 6 RGB LED PAR...
Cleaning Cleaning Optical lenses Clean the optical lenses, that are accessible from the outside, regularly in order to optimize the light output. The frequency of cleaning depends on the operating environment: wet, smoky or particularly dirty surroundings can cause more accumulation of dirt on the optics of the device.
Protecting the environment Protecting the environment Disposal of the packaging mate‐ rial For the transport and protective packaging, environmentally friendly materials have been chosen that can be supplied to normal recycling. Ensure that plastic bags, packaging, etc. are properly disposed of. Do not just dispose of these materials with your normal household waste, but make sure that they are collected for recycling.
Need help?
Do you have a question about the fun generation USB PartyPar 6 RGB and is the answer not in the manual?
Questions and answers