Download Print this page

Maintenance And Servicing; Maintenance And Cleaning - Bosch Performance Line CX BDU3840 Original Operating Instructions

Drive unit
Hide thumbs Also See for Performance Line CX BDU3840:

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 7
Irrespective of the type of gear shifting, it is advisable that
you briefly reduce the pressure on the pedals when changing
gear. This will aid gear shifting and reduce wear on the
powertrain.
By selecting the correct gear, you can increase your speed
and range while applying the same amount of force.
Gaining initial experience
We recommend that you gain initial experience with the
eBike away from busy roads.
Test the various riding modes. Start in a riding mode with a
small amount of assistance. As soon as you feel confident,
you can ride your eBike in traffic like any other bicycle.
Test the range of your eBike in different conditions before
planning longer and more demanding trips.
Influences on range
It is not possible to calculate the range accurately before and
during a trip because the range is affected by a number on
factors.
Enter the factors in the Range Assistant in order to better as-
sess the effects on the range.
Scan the code provided to open the Range As-
sistant.
Taking care of your eBike
Please observe the operating and storage temperatures of
the eBike components. Protect the drive unit, on-board com-
puter and eBike battery against extreme temperatures (e.g.
from intense sunlight without adequate ventilation). The
components (especially the eBike battery) can become dam-
aged through extreme temperatures.

Maintenance and servicing

Maintenance and cleaning

When changing the bulbs, ensure that they are compatible
with the Bosch eBike system of the generation the smart
system (ask your bicycle dealer) and are suitable for the
specified voltage. Bulbs must only be replaced with bulbs of
the same voltage.
All components fitted to the drive unit and all other compon-
ents of the drive (e.g. chainring, chainring receptacle, ped-
als, cranks) must only be replaced with identical compon-
ents or components that have been specifically approved by
the manufacturer for your eBike. This will protect the drive
unit from overloading and becoming damaged.
Keep the drive unit clean and avoid contact with aggressive
substances and fuels, e.g. diesel. Take care when cleaning
the drive unit.
Do not immerse any components, including the drive unit, in
water or clean them with pressurised water.
Have your eBike checked by an expert at least once a year
(including mechanical parts, up-to-dateness of system soft-
ware).
Bosch eBike Systems
Please have your eBike serviced and repaired by an author-
ised bicycle dealer.
After-sales service and advice on using products
If you have any questions about the eBike and its compon-
ents, contact an authorised bicycle dealer.
For contact details of authorised bike dealerships, please
visit www.bosch-ebike.com.
Further information on the eBike components
and their functions can be found in the Bosch
eBike Help Center.
Disposal and substances in products
You can find information about substances in products at the
following link:
www.bosch-ebike.com/en/material-compliance.
Do not dispose of eBikes and their components with house-
hold waste.
An in-store return is possible, provided the retailer voluntar-
ily offers a return or is legally obligated to do so. Refer to the
national regulations in this case.
The drive unit, on-board computer incl. operat-
ing unit, eBike battery, speed sensor, ac-
cessories and packaging should be disposed of
in an environmentally correct manner.
Check that your personal data has been deleted from the
device.
Batteries that can be removed from the power tool without
destruction must be removed before disposal itself and sor-
ted for separate battery collection.
In accordance with Directive 2012/19/EU
and Directive 2006/66/EC respectively, elec-
tronic devices that are no longer usable and de-
fective/drained batteries must be collected
separately and recycled in an environmentally
friendly manner.
Electrical and electronic equipment are collected separately
for pre-sorting by type and helps to ensure that raw materi-
als are treated and recovered properly, thereby protecting
people and the environment.
Subject to change without notice.
English – 3
0 275 007 3D4 | (19.02.2024)

Advertisement

loading
Need help?

Need help?

Do you have a question about the Performance Line CX BDU3840 and is the answer not in the manual?

Subscribe to Our Youtube Channel

Save PDF