Elements CTNC300NS Assembly Instructions

Caution : Please read instructions thoroughly before unpacking assembly parts. Sharp, exposed staple tips can cause injury,
therefore, for your protection, please remove any exposed staples used in packing.
1. We recommend that you should assemble this product with the assistance of another person; this will make assembly
easier and will help to eliminate damage the product or injury to persons during assembly.
2. Be sure to check all packing materials carefully for small parts that may have come loose Inside the carton during
shipment.
3. Please do not over tighten screws or bolts.
4. Please put all parts on a non-abrasive floor before assembly and follow the assembly steps to assemble your newly
purchased product correctly and efficiently.
PARTS LIST
NO. PART DESC.
A TABLE TOP
B BOTTOM SHELF
C POST LEGS
D FEET W/ HANGER BOLT
⚠
Only tighten all bolts when all bolts aligned with bolt inserts
Assembly Instructions For
CTNC300NS / CTNC400NS / CTNC700NS
CODE Q'TY
1
PCTNC300NSSHFHS
PCTNC400NSSHFHS 1
PCTNC700NSSHFHS
PCTNC300NSLEGHS
PCTNC400NSLEGHS 4
PCTNC700NSLEGHS
PCTNC300NSFETHS
PCTNC400NSFETHS 4
PCTNC700NSFETHS
C
1
Side Table
NO. HARDWARE DESC.
1 SCREWDRIVER (NOT PROVIDED)
A
STEP 1
STEP 3
MADE IN VIETNAM
HARDWARE LIST
CODE
D
B
STEP 2
1
Q'TY
1
Page 1 of 2