Forced Operation; Test Operation - LG LA121CNM Owner's Manual

Auto clean (Optional)
1. Whenever you press the AUTO CLEAN button, Auto Clean Function will be
AUTO CLEAN
2. Auto Clean function works before and after cooling or dehumidification mode.
3. When the unit is started after the reservation of Auto Clean ,the Cool Start
4. When you press Start/Stop button to turn off the unit after the you have reserved
5. If you press the AUTO CLEAN button again during the product operation , Auto
NOTICE
During Auto Clean function, moistures left in indoor units after Cooling Operation or Healthy
Dehumidification Operation can be removed.
During Auto Clean function, only Start/Stop button, Plasma button and AUTO CLEAN button are
available.

Forced operation

Operation procedures when the remote control can't be used.
The operation will be started if the ON/OFF button is pressed.
If you want to stop operation, re-press the button.
Cooling Model
Operating mode Cooling
Indoor FAN Speed High
Setting Temperature 22°C(71.6°F)

Test operation

During the TEST OPERATION, the unit operates in cooling mode at high speed fan, regardless of room
temperature and resets in 18 minutes.
During test operation, if remote controller signal is received, the unit operates as remote controller sets.
If you want to use this operation, Press and hold the ON/OFF button for 3~5 seconds, then the buzzer sound
1 "beep".
If you want to stop the operation, re-press the button.
reserved and cancelled.
For details, refer to the below points.
function operates and indoor Fan is started after 20 seconds.
Auto Clean function, the air-conditioner circulates the indoor air in the Auto
Clean mode with no more Cooling or Dehumidification operation. It lasts for 30
minutes.
Clean function will be cancelled.
Room Temp. 24°C(75.2°F)
Cooling
High
22°C(71.6°F)
Heat pump Model
21°C(69.8°F) Room Temp. < 24°C(75.2°F) Room Temp. < 21°C(69.8°F)
Healthy Dehumidification
High
23°C(73.4°F)
Operating Instruction
ON/OFF
button
Heating
High
24°C(75.2°F)
Owner's Manual 23