Advertisement
5.Import EZCAD Config and select the folder
7.You can see the following window, UV/YAG
click "next"
9.Click "finish" and it will in the device list
6.Select folder "EZCAD for Omni 1"---->" Plug", and
choose "markcfg7" and click "next"
and
8. Change the name if necessary, and input the
right X and Y Axis Length according to the lens.
Click "next"
10. The status will change into "Ready" when the
machine is on and connected via USB
15
Advertisement
Need help?
Do you have a question about the OMNI 1 and is the answer not in the manual?