1. Manuals
  2. Brands
  3. Samoa Manuals
  4. Paint Sprayer
  5. Ghibli LA96000/1
  6. Manual

Samoa Ghibli LA96000/1 Manual

30:1 / 40:1 pneumatic pump
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
www.larius.com
IT
https://www.larius.com/wp-content/uploads/GHIBLI3040_I.pdf
EN
https://www.larius.com/wp-content/uploads/GHIBLI3040_GB.pdf
DE
https://www.larius.com/wp-content/uploads/GHIBLI3040_D.pdf
30:1 / 40:1
LA96000/1
LA96033/1
LA96058/1
LA96059/1
LA96105
LA96041
LA96107
LA96108
FR
https://www.larius.com/wp-content/uploads/GHIBLI3040_F.pdf
ES
https://www.larius.com/wp-content/uploads/GHIBLI3040_E.pdf
RU
https://www.larius.com/wp-content/uploads/GHIBLI3040_RU.pdf
EN
Pneumatic Pump
Ghibli
Airless Pneumatic Pump
GHIBLI 30:1 Carbon steel
GHIBLI 40:1 Carbon steel
GHIBLI 30:1 Stainless steel
GHIBLI 40:1 Stainless steel
Air-Controlled Pneumatic Pump
GHIBLI 30:1 Carbon steel
GHIBLI 40:1 Carbon steel
GHIBLI 30:1 Stainless steel
GHIBLI 40:1 Stainless steel

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Ghibli LA96000/1 and is the answer not in the manual?

Questions and answers

Related Manuals for Samoa Ghibli LA96000/1

Summary of Contents for Samoa Ghibli LA96000/1

  • Page 1 www.larius.com Pneumatic Pump Ghibli 30:1 / 40:1 Airless Pneumatic Pump LA96000/1 GHIBLI 30:1 Carbon steel LA96033/1 GHIBLI 40:1 Carbon steel LA96058/1 GHIBLI 30:1 Stainless steel LA96059/1 GHIBLI 40:1 Stainless steel Air-Controlled Pneumatic Pump LA96105 GHIBLI 30:1 Carbon steel LA96041 GHIBLI 40:1 Carbon steel LA96107 GHIBLI 30:1 Stainless steel LA96108...
  • Page 2 IT EN GHIBLI 30:1/40:1 This manual is to be considered as an English language translation of the original manual in Italian. The manufacturer shall bear no responsibility for any damages or inconveniences that may arise due to the incorrect translation of the instructions contained within the original manual in Italian. Due to a constant product improvement programme, the factory reserves the right to modify technical details mentioned in this manual without prior notice.

  • Page 3: Table Of Contents

    WE ADVISE THE USE OF THIS EQUIPMENT ONLY BY PROFESSIONAL OPERATORS. ONLY USE THIS MACHINE FOR USAGE SPECIFICALLY MENTIONED IN THIS MANUAL. Thank you for choosing a SAMOA. product. As well as the product purchased, you will receive a range of support services enabling you to achieve the results desired, quickly and professionally.

  • Page 4: Awarnings

    IT EN GHIBLI 30:1/40:1 WARNINGS The table below provides the meaning of the symbols used in this manual in relation to using, earthing, operating, maintaining, and repairing of this equipment. • Read this operator’s manual carefully before using the equipment. •...

  • Page 5: Btransport And Unpacking

    IT EN GHIBLI 30:1/40:1 SAFETY RULES TRANSPORT AND UNPACKING • The packed parts should be handled as indicated in the • THE EMPLOYER SHALL TRAIN ITS EMPLOYEES ABOUT symbols and markings on the outside of the packing. ALL THOSE RISKS STEMMING FROM ACCIDENTS, ABOUT •...
  • Page 6 IT EN GHIBLI 30:1/40:1 REGULARLY THE COMPONENTS OF THE SYSTEM. Always check that the product is compatible with REPLACE THE PARTS DAMAGED OR WORN. the materials composing the equipment (pump, spray gun, flexible hose and accessories) with which • TIGHTEN AND CHECK ALL THE FITTINGS FOR it can come into contact.

  • Page 7: Eworking Principle

    IT EN GHIBLI 30:1/40:1 WORKING PRINCIPLE GHIBLI 30:1 and 40:1 pumps are pneumatic pumps for high transmitted through a connecting rod to the material pumping pressure painting without the use of compressed air (AIRLESS) piston. or with the support of air (AIR-CONTROLLED). The stainless steel This allows for the material to be aspirated and pushed towards version is particularly suitable for use with water-based paints.

  • Page 8: Ftechnical Data

    IT EN GHIBLI 30:1/40:1 TECHNICAL DATA AIRLESS GHIBLI PUMP GHIBLI 30:1 GHIBLI 40:/1 Pump pressure ratio 30:1 40:1 Max. delivery at 60 cycles/min 3,8 l/min 3 l/min Air inlet 3/8" BSPP (F) 3/8" BSPP (F) Fluid inlet thread M36X2 (M) M36X2 (M) Fluid outtlet thread 1/4"...
  • Page 9 IT EN GHIBLI 30:1/40:1 Parts of the pump in contact with the material Pumping group: galvanised carbon steel and aluminium or stainless steel (based on the versions) Sealing balls: stainless steel AISI 420B Gaskets: PTFE + polyethylene Other parts of the pump Motor casing and motor piston: aluminium Pneumatic motor piston rod: stainless steel Trolley structure: painted sheet metal...

  • Page 10: Gdescription Of The Equipment

    IT EN GHIBLI 30:1/40:1 DESCRIPTION OF THE EQUIPMENT Airless version Air-controlled airless version Versione Airless Versione Air assisted airless Fig. 1 Pos. Description Pos. Description Compressed air inlet Air-mix spray technology Manometer reading air pressure alim. pump Air-material flexible pipe Feed air pressure regulator.
  • Page 11 IT EN GHIBLI 30:1/40:1 Fig. 2 Pos. Description Pos. Description High pressure filter material outlet Recirculation pipe fitting fixing Recirculating cock Cable grounding with gripper High pressure filter out material REV. 12 - 11/2024 - Cod. 150088...

  • Page 12: Hsetting-Up

    IT EN GHIBLI 30:1/40:1 SETTING-UP CONNECTION OF FLEXIBLE HIGH PRESSURE PIPES AIRLESS version CONNECTION TO THE FEED AIR • Connect the high pressure flexible hose (3) to the pump and • For pump feed use a hose (1) with an internal diameter no to the spray gun, paying attention to tighten the fittings strongly lower than 10 mm.

  • Page 13: Washing Of The Brand-New Equipment

    IT EN GHIBLI 30:1/40:1 WASHING OF THE BRAND-NEW EQUIPMENT • The equipment has been tested at our plant with light mineral oil left inside of the pumping element as protection. Therefore, before sucking the product, carry out a washing using a diluent. •...

  • Page 14: Jcleaning At The End Of The Work

    IT EN GHIBLI 30:1/40:1 • Dip the suction hose into the tank of the washing solvent At the start of each working day, make sure that (ensure it is compatibile with the product being used). the ring nut is filled with hydraulic oil (ref. 16340); •...

  • Page 15: Lmanual Reset Of The Pneumatic Motor

    IT EN GHIBLI 30:1/40:1 MANUAL RESET OF THE To tighten the packing nut (1) use wrench supplied (2). The packing nut must be tightened so as to avoid PNEUMATIC MOTOR wastes of product, but not excessively to avoid the seizure of the pumping piston and the wear of seals. In case of persistent coming out of product, replace the seals.

  • Page 16: Ndisassembly Of The Pumping Group

    IT EN GHIBLI 30:1/40:1 DISASSEMBLY OF Remove the screws (4) and the washers (5). • Carefully extract the motor cylinder (6) fom the pump. • THE PUMPING GROUP • Check the condition of each part of the motor. • Follow the end of work cleaning procedure before disassembling the pumping unit.

  • Page 17: Troubleshooting

    IT EN GHIBLI 30:1/40:1 Fig. 2 Fig. 3 TROUBLESHOOTING Problem Cause Solution The pump does not start Feed air not sufficient; Check on the air supply line. Increase the diameter of the feed hose; Outlet product line clogged; - Open the recirculation tap to check whether the pump starts up.
  • Page 18 IT EN GHIBLI 30:1/40:1 Problem Cause Solution Accelerate working and no pressure There is no product; Check the flexible suction tube; of the pump The pump sucks air; Controllare il tubo di aspirazione flessibile; Gaskets of the pumping rod worn; Replace the lower gaskets;...

  • Page 19: Spare Parts

    IT EN GHIBLI 30:1/40:1 SPARE PARTS Complete pneumatic motor pump Ghibli BASE 30:1 / 40:1 pag. 16 Complete pneumatic motor pump Ghibli for TROLLEY/WALL 30:1 / 40:1 pag. 18 C o m p l e t e f i l t e r s p l i t galvanized and stainless steel version pag.

  • Page 20: Pcomplete Pneumatic Motor Pump Ghibli

    IT EN GHIBLI 30:1/40:1 COMPLETE PNEUMATIC MOTOR PUMP GHIBLI 30:1 / 40:1 BASE PUMP VERSION WARNING: always indicate code and quantity for each part required. Fig. 1 REV. 12 - 11/2024 - Cod. 1500885...
  • Page 21 IT EN GHIBLI 30:1/40:1 Pos. Code Description Q. ty Pos. Code Description Q. ty LA96550/1 Complete motor base pump 30:1 LA96027 Complete screw valve LA96551/1 Complete motor base pump 40:1 LA33031 Washer LA91602 Base pump plug LA96016 Piston rod LA95075 O-ring LA96017 Bush...

  • Page 22: 30:1/40:1 Trolley And Wall Version

    IT EN GHIBLI 30:1/40:1 COMPLETE PNEUMATIC MOTOR PUMP GHIBLI 30:1 / 40:1 TROLLEY AND WALL PUMP VERSION WARNING: always indicate code and quantity for each part required. Fig. 1 REV. 12 - 11/2024 - Cod. 1500885...
  • Page 23 IT EN GHIBLI 30:1/40:1 PUMP COMPLETE MOTOR VERSION 30:1 PUMP COMPLETE MOTOR VERSION 40:1 Code Description Code Description LA96550 Complete motor trolley version LA96551 Complete motor trolley version LA96550/2 Complete motor wall version LA96551/2 Complete motor wall version Pos. Code Description Q.

  • Page 24: Complete Pumping Pump Ghibli 30:1 / 40:1 Galvanized And Stainless Steel Version

    IT EN GHIBLI 30:1/40:1 COMPLETE PUMPING PUMP GHIBLI GALVANIZED AND STAINLESS STEEL VERSION 30:1 / 40:1 WARNING: always indicate code and quantity for each part required. Fig. 1 REV. 12 - 11/2024 - Cod. 1500885...
  • Page 25 IT EN GHIBLI 30:1/40:1 GALVANIZED 30:1 SPLIT VERSION GALVANIZED 40:1 SPLIT VERSION Code LA96070 Code LA96500 Pos. Code Description Q.ty Pos. Code Description Q.ty LA96070 LA96500 omplete pumping omplete pumping LA96023 Spring LA96023 Spring LA91001/1 Oil tank LA91001/1 Oil tank LA96233 'Oil' label LA96233...
  • Page 26 IT EN GHIBLI 30:1/40:1 STAINLESS STEEL 30:1 SPLIT VERSION Cod. LA98340 STAINLESS STEEL 40:1 SPLIT VERSION Cod. LA98400 Pos. Code Description Q. ty Pos. Code Description Q. ty LA98340 omplete pumping LA98400 omplete pumping LA96023 Spring LA96023 Spring LA91001/1 Oil tank LA91001/1 Oil tank LA96233 'Oil' label...
  • Page 27 IT EN GHIBLI 30:1/40:1 AIR REGULATION - TROLLEY AIRLESS VERSION Ref. LA96250 WARNING: always indicate code and quantity for each part required. Fig. 1 Pos. Code Description Q. ty Pos. Code Description Q. ty LA96250 Complete group LA96217 Tubo 12/10mm - 0,5m LA96214 Elbow LA96259...
  • Page 28 IT EN GHIBLI 30:1/40:1 AIR REGULATION - WALL AIRLESS VERSION Ref. LA96250/1 WARNING: always indicate code and quantity for each part required. Fig. 1 Pos. Code Description Q. ty Pos. Code Description Q. ty LA96250/1 Complete group LA91101 Valve LA96261 Reduction LA96259 Manometer...

  • Page 29: Air Regulation - Trolley Air-Controlled Airless Version Rif. 96262

    IT EN GHIBLI 30:1/40:1 AIR REGULATION - AIR-CONTROLLED AIRLESS TROLLEY VERSION Rif. LA96262 WARNING: always indicate code and quantity for each part required. Fig. 1 Pos. Code Description Q. ty Pos. Code Description Q. ty LA96262 Complete group LA3379 T female fitting 3/8 LA96214 Elbow LA3560...

  • Page 30: Version Rif. 96262/1

    IT EN GHIBLI 30:1/40:1 AIR REGULATION - AIR-CONTROLLED AIRLESS WALL VERSION Rif. LA96262/1 WARNING: always indicate code and quantity for each part required. Fig. 1 REV. 12 - 11/2024 - Cod. 1500885...
  • Page 31 IT EN GHIBLI 30:1/40:1 Pos. Code Description Q. ty LA96262/1 Complete group LA96216 Rapid coupling 3/8 Tube Ø 12 LA96259 Manometer 3a+3b LA91107 RL 3/8 group + bracket LA91020 Adapter 3/8 mm CON LA3379 T female fitting 3/8 LA3560 Adapter 3/8 1/4 mm CON-CON LA8167 Manometer LA3344...

  • Page 32: Wcomplete Filter Split Ghibli 30:1/40:1

    IT EN GHIBLI 30:1/40:1 COMPLETE FILTER SPLIT GHIBLI PUMP 30:1/40:1 WARNING: always indicate code and quantity for each part required. Fig. 1 REV. 12 - 11/2024 - Cod. 1500885...
  • Page 33 IT EN GHIBLI 30:1/40:1 STAINLESS STEEL 30:1/40:1 VERSION GALVANIZED 30:1/40:1 VERSION Pos. Code Description Q. ty Pos. Code Description Q. ty Complete filter M16x1,5 Complete filter M16x1,5 LA98388 LA96220 Complete filter 1/4'' Complete filter 1/4'' LA98388/1 LA96220/1 LA10107 Warning label LA10107 Warning label LA98384...

  • Page 34: Xpaint Suction System

    IT EN GHIBLI 30:1/40:1 PAINT SUCTION SYSTEM - SPLIT VERSION Rif. LA16610 - STAINLESS STEEL VERSION Rif. LA16611 WARNING: always indicate code and quantity for each part required. Fig. 1 Pos. Code Description Q. ty Pos. Code Description Q. ty Paint suction system with suction Paint suction system with suction LA16610...

  • Page 35: Ycomplete Trolley

    IT EN GHIBLI 30:1/40:1 COMPLETE TROLLEY WARNING: always indicate code and quantity for each part required. Fig. 1 Pos. Code Description Q. ty Pos. Code Description Q. ty LA96320 Complete trolley LA91047 Wheel washer LA16271 Trolley handle LA8029 Screw LA16272 Trolley frame LA95063 Washer...

  • Page 36: Wall Mounting Bracket

    IT EN GHIBLI 30:1/40:1 WALL MOUNTING BRACKET GHIBLI 30:1/40:1 Rif. LA91200/1 WARNING: always indicate code and quantity for each part required. Fig. 1 Code Description Q.ty LA91200/1 Wall mounting bracket REV. 12 - 11/2024 - Cod. 1500885...

  • Page 37: Aa Atex Certification

    IT EN GHIBLI 30:1/40:1 ATEX CERTIFICATE Safety instructions for using GHIBLI series pneumatic piston transfer pumps in high risk environments where potentially explosive gasses or vapours are present. DESCRIPTION These safety instructions refer to the installation, use and mainte- GHIBLI series pneumatic piston pumps are group nance of GHIBLI series pneumatic piston transfer pumps in high II mechanical devices for use in areas where risk environments where potentially explosive gasses or vapours...
  • Page 38 IT EN GHIBLI 30:1/40:1 Correspondence between hazardous areas, substances and categories HAZARDOUS AREAS CATEGORIES ACCORDING TO THE 94/9/CE DIRECTIVE Gas, vapori o nebbie Zona 0 Gas, vapori o nebbie Zona 1 2G oppure 1G Gas, vapori o nebbie Zona 2 3G, 2G oppure 1G SAFETY INSTRUCTIONS FOR INSTALLATION IN HAZARDOUS AREAS...
  • Page 39 IT EN GHIBLI 30:1/40:1 REV. 12 - 11/2024 - Cod. 150088...

  • Page 41: Ce Declaration Of Conformity

    IT EN GHIBLI 30:1/40:1 CE DECLARATION OF CONFORMITY Company LARIUS srl Via Antonio Stoppani 21 - 23801 Calolziocorte (LC) ITALY Tel: +39 0341 621152 Fax: +39 0341 621243 E-mail: larius@larius.com Declares under his owns resonsibility that the product: GHIBLI 30:1 40:1 Airless pneumatic pumps for spray painting complies with the directives: - EC Directive 2006/42 Machinery Directive...
  • Page 42 TEL. +1 (828) 645-2290 - FAX: +1 (828) 658 0840 TEL.: +44 1942 850600 - FAX: +44 1942 812160 ©Copyright, SAMOA INDUSTRIAL, S.A. SAMOA Industrial, S.A. is an ISO 9001, ISO 14001 and ISO 45001 certified company. Contact us today! Visit www.samoaindustrial.com for more information.

This manual is also suitable for:

Ghibli la96033/1Ghibli la96058/1Ghibli la96059/1Ghibli la96105Ghibli la96041Ghibli la96107 ... Show all

Table of Contents