Yamaha Star XV250D 2012 Owner's Manual
  1. Manuals
  2. Brands
  3. Yamaha Manuals
  4. Motorcycle
  5. Star XV250D 2012
  6. Owner's manual
Yamaha Star XV250D 2012 Owner's Manual

Yamaha Star XV250D 2012 Owner's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Read this manual carefully before operating this vehicle.
OWNER'S MANUAL
XV250D(C)
LIT-11626-26-37
46B-28199-14

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Star XV250D 2012 and is the answer not in the manual?

Questions and answers

Related Manuals for Yamaha Star XV250D 2012

Summary of Contents for Yamaha Star XV250D 2012

  • Page 1 Read this manual carefully before operating this vehicle. OWNER’S MANUAL XV250D(C) LIT-11626-26-37 46B-28199-14...
  • Page 2 EAU10042 Read this manual carefully before operating this vehicle. This manual should stay with this vehicle if it is sold.
  • Page 3 Yamaha has met these standards without reducing the performance or economy of operation of the motorcycle. To maintain these high standards, it is important that you and your Yamaha dealer pay close attention to the recommended maintenance schedules and operating instructions contained within this manual.

  • Page 4: Important Manual Information

    IMPORTANT MANUAL INFORMATION EAU10133 Particularly important information is distinguished in this manual by the following notations: This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.
  • Page 5 IMPORTANT MANUAL INFORMATION EAU10193 XV250D(C) OWNER’S MANUAL ©2012 by Yamaha Motor Corporation, U.S.A. 1st edition, July 2012 All rights reserved. Any reprinting or unauthorized use without the written permission of Yamaha Motor Corporation, U.S.A. is expressly prohibited. Printed in Japan.

  • Page 6: Table Of Contents

    TABLE OF CONTENTS LOCATION OF IMPORTANT FOR YOUR SAFETY – Tires ..........7-17 LABELS ..........1-1 PRE-OPERATION CHECKS ..... 5-1 Spoke wheels ......7-19 Adjusting the clutch lever free SAFETY INFORMATION ....2-1 OPERATION AND IMPORTANT play ........... 7-19 RIDING POINTS......... 6-1 Adjusting the brake lever free DESCRIPTION ........3-1 Starting and warming up a cold...
  • Page 7 TABLE OF CONTENTS Battery ..........7-30 YAMAHA EXTENDED SERVICE Replacing the fuses ......7-32 (Y.E.S.) ........10-9 Replacing the headlight bulb ..7-33 Replacing the tail/brake light bulb ...........7-34 Replacing a turn signal light bulb ...........7-35 Supporting the motorcycle ....7-35 Front wheel ........7-36 Rear wheel ........7-38...

  • Page 8: Location Of Important Labels

    Read and understand all of the labels on your vehicle. They contain important information for safe and proper operation of your vehicle. Never remove any labels from your vehicle. If a label becomes difficult to read or comes off, a replacement label is available from your Yamaha dealer.
  • Page 9 LOCATION OF IMPORTANT LABELS California only NOTICE 10D-2815N-00 Cold tire normal pressure should be set as follows. 1.75 2.00 2.00 2.25 3CK-21668-A1...

  • Page 10: Safety Information

    SAFETY INFORMATION ● EAU1028A Never operate a motorcycle with- yourself conspicuous appears to out proper training or instruction. be very effective in reducing the Take a training course. Beginners chance of this type of accident. Be a Responsible Owner should receive training from a cer- Therefore: As the vehicle’s owner, you are respon- tified instructor.
  • Page 11 SAFETY INFORMATION ● Many accidents involve inexperi- • Always signal before turning or Protective Apparel enced operators. In fact, many op- changing lanes. Make sure that The majority of fatalities from motorcy- erators who have been involved in other motorists can see you. cle accidents are the result of head in- accidents do not even have a cur- ●...
  • Page 12 SAFETY INFORMATION ● Avoid Carbon Monoxide Poisoning Do not run engine outdoors where When loading within this weight limit, All engine exhaust contains carbon engine exhaust can be drawn into keep the following in mind: monoxide, a deadly gas. Breathing car- a building through openings such ●...
  • Page 13 Yamaha accessories, which are avail- formed to your vehicle that change any lightweight as possible and able only from a Yamaha dealer, have of the vehicle’s design or operation should be kept to a minimum. been designed, tested, and approved characteristics can put you and others •...
  • Page 14 SAFETY INFORMATION ● tor and may limit control ability, Check that the fuel cock (if therefore, such accessories are equipped) is in the “OFF” position not recommended. and that there are no fuel leaks. ● Use caution when adding electri- ●...

  • Page 15: Description

    DESCRIPTION EAU10410 Left view 1. Headlight (page 7-33) 9. Fuel cock (page 4-7) 2. Steering lock (page 4-8) 10.Shift pedal (page 4-4) 3. Fuel tank (page 4-5) 4. Battery (page 7-30) 5. Fuses (page 7-32) 6. Helmet holder (page 4-9) 7.

  • Page 16: Right View

    DESCRIPTION EAU10420 Right view 1. Tail/brake light (page 7-34) 9. Shock absorber assembly spring preload adjusting ring (page 4-10) 2. Rear turn signal lights (page 7-35) 3. Rider seat (page 4-9) 4. Air filter element (page 7-14) 5. Front turn signal/position lights (page 7-35) 6.

  • Page 17: Controls And Instruments

    DESCRIPTION EAU10430 Controls and instruments 1. Clutch lever (page 4-3) 2. Left handlebar switches (page 4-2) 3. Speedometer unit (page 4-2) 4. Right handlebar switches (page 4-2) 5. Brake lever (page 4-4) 6. Throttle grip (page 7-16) 7. Fuel tank cap (page 4-5)

  • Page 18: Instrument And Control Functions

    INSTRUMENT AND CONTROL FUNCTIONS EAU10451 EWA10072 EAU10981 Main switch Indicator lights WARNING Never turn the key to “OFF” while the vehicle is moving, otherwise the electrical systems will be switched off, which may result in loss of con- trol or an accident. EAU54370 (Parking) The taillight and position lights are on,...

  • Page 19: Speedometer Unit

    INSTRUMENT AND CONTROL FUNCTIONS EAU11080 EAU11630 EAU1234B Speedometer unit Handlebar switches High beam indicator light “ ” This indicator light comes on when the Left high beam of the headlight is switched 1. Speedometer 2. Odometer 1. Dimmer switch “ ”...

  • Page 20: Clutch Lever

    INSTRUMENT AND CONTROL FUNCTIONS EAU12400 EAU12711 EAU12820 Clutch lever Dimmer switch “ ” Start switch “ ” Set this switch to “ ” for the high Push this switch to crank the engine beam and to “ ” for the low beam. with the starter.

  • Page 21: Shift Pedal

    INSTRUMENT AND CONTROL FUNCTIONS EAU12871 EAU12891 EAU12941 Shift pedal Brake lever Brake pedal 1. Shift pedal 1. Brake lever 1. Brake pedal The shift pedal is located on the left The brake lever is located on the right The brake pedal is on the right side of side of the motorcycle and is used in side of the handlebar.

  • Page 22: Fuel Tank Cap

    INSTRUMENT AND CONTROL FUNCTIONS EAU13041 EAU13212 Fuel tank cap Fuel The fuel tank cap cannot be closed un- Make sure there is sufficient gasoline in less the key is in the lock. In addition, the tank. the key cannot be removed if the cap is EWA10881 WARNING not properly closed and locked.
  • Page 23 Handle gaso- as well as to the exhaust system. line with care. Never siphon gaso- Your Yamaha engine has been de- line by mouth. If you should swallow signed to use unleaded gasoline with a some gasoline or inhale a lot of gas-...

  • Page 24: Fuel Cock

    INSTRUMENT AND CONTROL FUNCTIONS EAU13581 Fuel cock This model is equipped with a negative pressure fuel cock. The fuel cock sup- plies fuel from the tank to the carburetor while also filtering it. The fuel cock lever positions are ex- plained as follows and shown in the il- lustrations.

  • Page 25: Starter (Choke) Lever

    INSTRUMENT AND CONTROL FUNCTIONS EAU13590 EAU13730 To unlock the steering Starter (choke) lever “ ” Steering lock 1. Open the steering lock cover, and then insert the key. 2. Push the key in, turn it 1/8 turn counterclockwise so that it moves out, and then release it.

  • Page 26: Rider Seat

    INSTRUMENT AND CONTROL FUNCTIONS EAU14220 EAU14282 Rider seat Helmet holder To remove the rider seat Remove the bolts, and then pull the rid- er seat off. 1. Projection 2. Seat holder 1. Helmet holder 2. Place the rider seat in the original 2.

  • Page 27: Adjusting The Shock Absorber Assemblies

    (a). To de- Yamaha’s ignition circuit cut-off crease the spring preload and thereby system has been designed to assist soften the suspension, turn the adjust-...

  • Page 28: Ignition Circuit Cut-Off System

    INSTRUMENT AND CONTROL FUNCTIONS this system regularly and have a EAU15314 Ignition circuit cut-off system Yamaha dealer repair it if it does not The ignition circuit cut-off system (com- function properly. prising the sidestand switch, clutch switch and neutral switch) has the fol- lowing functions.
  • Page 29 INSTRUMENT AND CONTROL FUNCTIONS WARNING With the engine turned off: 1. Move the sidestand down. If a malfunction is noted, have a Yamaha 2. Make sure that the engine stop switch is set to “ ”. dealer check the system before riding.

  • Page 30: For Your Safety - Pre-Operation Checks

    • If necessary, add recommended oil to specified level. 7-11 • Check vehicle for oil leakage. • Check operation. • If soft or spongy, have Yamaha dealer bleed hydraulic system. • Check lever free play. • Adjust if necessary. Front brake •...
  • Page 31 • Make sure that operation is smooth. • Check throttle grip free play. Throttle grip 7-16, 7-27 • If necessary, have Yamaha dealer adjust throttle grip free play and lubricate cable and grip housing. • Make sure that operation is smooth. Control cables 7-26 •...
  • Page 32 FOR YOUR SAFETY – PRE-OPERATION CHECKS ITEM CHECKS PAGE • Check fluid level. Battery 7-30 • Fill with distilled water if necessary.

  • Page 33: Operation And Important Riding Points

    The time neces- light should come on. If not, ask a sary for starter (choke) use is normally Yamaha dealer to check the elec- 40 seconds but depends upon the am- trical circuit. bient temperature. The colder the tem- 4.

  • Page 34: Starting A Warm Engine

    OPERATION AND IMPORTANT RIDING POINTS ECA11042 EAU16640 EAU16671 Starting a warm engine Shifting NOTICE Follow the same procedure as for start- For maximum engine life, never ac- ing a cold engine with the exception celerate hard when the engine is that the starter (choke) is not required cold! when the engine is warm.
  • Page 35 OPERATION AND IMPORTANT RIDING POINTS ECA10260 4. At the recommended shift points 3. Shift the transmission into the neu- NOTICE shown in the following table, close tral position when the motorcycle ● the throttle, and at the same time, is almost completely stopped. The Even with the transmission in quickly pull the clutch lever in.

  • Page 36: Engine Break-In

    Since the engine is brand new, do not ● Since the engine and exhaust immediately have a Yamaha dealer put an excessive load on it for the first system can become very hot, check the vehicle.

  • Page 37: Periodic Maintenance And Adjustment

    – possibly leading to pending on the weather, terrain, geo- that is certified (if applicable). Yamaha death. See page 2-3 for more in- graphical location, and individual use, dealers are trained and equipped to...

  • Page 38: Owner's Tool Kit

    If you do not have the tools or experi- ence required for a particular job, have a Yamaha dealer perform it for you.

  • Page 39: Periodic Maintenance Chart For The Emission Control System

    From 19000 mi (31000 km) or 36 months, repeat the maintenance intervals starting from 7000 mi (11000 km) or 12 months. ● Items marked with an asterisk require special tools, data and technical skills, have a Yamaha dealer perform the service. EAU17581 Periodic maintenance chart for the emission control system...
  • Page 40 PERIODIC MAINTENANCE AND ADJUSTMENT INITIAL ODOMETER READINGS 600 mi 4000 mi 7000 mi 10000 mi 13000 mi 16000 mi ITEM ROUTINE (1000 km) (6000 km) (11000 km) (16000 km) (21000 km) (26000 km) 1 month 6 months 12 months 18 months 24 months 30 months Evaporative emis-...

  • Page 41: General Maintenance And Lubrication Chart

    PERIODIC MAINTENANCE AND ADJUSTMENT EAU32166 General maintenance and lubrication chart INITIAL ODOMETER READINGS 600 mi 4000 mi 7000 mi 10000 mi 13000 mi 16000 mi ITEM ROUTINE (1000 km) (6000 km) (11000 km) (16000 km) (21000 km) (26000 km) 1 month 6 months 12 months 18 months...
  • Page 42 Every 300 mi (500 km) and after washing the motorcycle and riding in the rain or Drive chain • Adjust and thoroughly lubricate wet areas chain with Yamaha chain and ca- ble lube. • Check bearing assemblies for looseness. √...
  • Page 43 Front and rear brake √ √ √ √ √ √ 25 * • Check operation. switches Control and meter • Apply Yamaha chain and cable √ √ √ √ √ √ 26 * cables lube or engine oil thoroughly.
  • Page 44 PERIODIC MAINTENANCE AND ADJUSTMENT INITIAL ODOMETER READINGS 600 mi 4000 mi 7000 mi 10000 mi 13000 mi 16000 mi ITEM ROUTINE (1000 km) (6000 km) (11000 km) (16000 km) (21000 km) (26000 km) 24 months 30 months 1 month 6 months 12 months 18 months •...

  • Page 45: Removing And Installing The Panel

    PERIODIC MAINTENANCE AND ADJUSTMENT EAU18751 EAU19545 Removing and installing the Checking the spark plugs panel The spark plugs are important engine components, which are easy to check. The panel shown needs to be removed Since heat and deposits will cause any to perform some of the maintenance spark plug to slowly erode, the spark jobs described in this chapter.
  • Page 46 If any spark plug shows a distinctly dif- 1. Spark plug gap ferent color, the engine could be oper- ating improperly. Do not attempt to Spark plug gap: diagnose such problems yourself. In- 0.6–0.7 mm (0.024–0.028 in) stead, have a Yamaha dealer check the vehicle. 7-10...

  • Page 47: Canister (For California Only)

    PERIODIC MAINTENANCE AND ADJUSTMENT ● EAU19681 Make sure that the canister breath- EAU19755 Canister (for California only) Engine oil and oil filter ele- er is not blocked, and if necessary, ment clean it. The engine oil level should be checked before each ride.
  • Page 48 PERIODIC MAINTENANCE AND ADJUSTMENT 3. Remove the engine oil filler cap, the engine oil drain bolt and its Skip steps 4–6 if the oil filter element is gasket to drain the oil from the not being replaced. crankcase. 4. Remove the oil filter element cover by removing the bolts.
  • Page 49 PERIODIC MAINTENANCE AND ADJUSTMENT fication of “CD” or oils of a high- Tightening torque: er quality than specified. In Engine oil drain bolt: addition, do not use oils labeled 34 Nm (3.4 m·kgf, 25 ft·lbf) “ENERGY CONSERVING II” or 8. Refill with the specified amount of higher.

  • Page 50: Cleaning The Air Filter Element

    PERIODIC MAINTENANCE AND ADJUSTMENT EAU32739 3. Remove the air filter case cover by Cleaning the air filter element removing the screws. The air filter element should be cleaned or replaced at the intervals specified in the periodic maintenance and lubrica- tion chart.
  • Page 51 12. Install the bolts. The air filter element should be wet but not dripping. Recommended oil: Yamaha foam air filter oil or other quality foam air filter oil 7. Pull the sponge material over the 1. Sponge material air filter element frame.

  • Page 52: Carburetor

    1. Throttle grip free play The throttle grip free play should mea- sure 3.0–5.0 mm (0.12–0.20 in) at the inner edge of the throttle grip. Periodi- cally check the throttle grip free play and, if necessary, have a Yamaha deal- er adjust it. 7-16...

  • Page 53: Valve Clearance

    Tire air pressure (measured on cold from occurring, the valve clearance small area of road contact. Therefore, it tires): must be adjusted by a Yamaha dealer is essential to maintain the tires in good 0–90 kg (0–198 lb): Front: at the intervals specified in the periodic condition at all times and replace them 175 kPa (1.75 kgf/cm², 25 psi)
  • Page 54 Yamaha Motor Co., Ltd. in it, or if the sidewall is cracked, con- quality product. tact a Yamaha dealer immediately and ●...

  • Page 55: Spoke Wheels

    If any damage is found, have skip steps 4–7. a Yamaha dealer replace the wheel. Do not attempt even the 4. Fully turn the adjusting bolt in di- smallest repair to the wheel. A de-...

  • Page 56: Adjusting The Brake Lever Free Play

    A soft or spongy feeling in the brake lever can indicate the presence of air in the hydraulic system. If there is air in the hy- draulic system, have a Yamaha dealer bleed the system before 1. Locknut 1. Locknut operating the motorcycle.

  • Page 57: Adjusting The Brake Pedal Height And Free Play

    2. Distance between brake pedal and footrest 3. Brake pedal free play EWA10670 WARNING 1. Locknut 2. Brake pedal height adjusting bolt It is advisable to have a Yamaha dealer make these adjustments. 3. Tighten the locknut. EWA11231 1. Brake pedal free play adjusting nut WARNING...

  • Page 58: Brake Light Switches

    Brake light switches Checking the front brake pads obtained as described, have a and rear brake shoes Yamaha dealer make this ad- The front brake pads and the rear brake justment. shoes must be checked for wear at the ●...

  • Page 59: Checking The Brake Fluid Level

    Brake fluid may damage painted sur- loss of braking ability. Observe point that the wear indicator reaches these precautions: faces or plastic parts. Always clean the wear limit line, have a Yamaha up spilled fluid immediately. dealer replace the brake shoes as a set. 7-23...

  • Page 60: Changing The Brake Fluid

    Changing the brake fluid Drive chain slack the brake fluid level to gradually go Have a Yamaha dealer change the The drive chain slack should be down. A low brake fluid level may indi- brake fluid at the intervals specified in...
  • Page 61 4. To tighten the drive chain, turn the EAU53050 To adjust the drive chain slack drive chain slack adjusting nut at Consult a Yamaha dealer before ad- each end of the swingarm in direc- justing the drive chain slack. tion (a). To loosen the drive chain, 1.

  • Page 62: Cleaning And Lubricating The Drive Chain

    Service the drive chain as or does not move smoothly, have a WARNING follows. Yamaha dealer check or replace it. After adjusting the brake pedal free WARNING! Damage to the outer ECA10583 play, check the operation of the...

  • Page 63: Checking And Lubricating The Throttle Grip And Cable

    In addi- pedals should be checked before each tion, the cable should be lubricated by a ride, and the pedal pivots should be lu- Yamaha dealer at the intervals speci- bricated if necessary. fied in the periodic maintenance chart. Brake pedal...

  • Page 64: Checking And Lubricating The Brake And Clutch Levers

    EWA10731 Clutch lever WARNING If the sidestand does not move up and down smoothly, have a Yamaha dealer check or repair it. Otherwise, the sidestand could contact the ground and distract the operator, re- sulting in a possible loss of control.

  • Page 65: Lubricating The Swingarm Pivots

    The swingarm pivots must be lubricat- intervals specified in the periodic main- ed by a Yamaha dealer at the intervals tenance and lubrication chart. specified in the periodic maintenance and lubrication chart.

  • Page 66: Checking The Steering

    Yamaha dealer check ward and backward. If any free and discharge quickly. The electrolyte the wheel bearings. play can be felt, have a Yamaha level, battery lead connections and dealer check or repair the steering. breather hose routing should be...
  • Page 67 PERIODIC MAINTENANCE AND ADJUSTMENT burns. Avoid any contact with To check the electrolyte level 3. If the electrolyte is at or below the skin, eyes or clothing and al- 1. Place the vehicle on a level sur- minimum level mark, add distilled ways shield your eyes when face and hold it in an upright posi- water to raise it to the maximum...

  • Page 68: Replacing The Fuses

    4. If the fuse immediately blows battery whenever necessary. again, have a Yamaha dealer 3. Fully charge the battery before in- check the electrical system. stallation. NOTICE: When install- 1.

  • Page 69: Replacing The Headlight Bulb

    PERIODIC MAINTENANCE AND ADJUSTMENT EAU23784 Replacing the headlight bulb This model is equipped with a halogen bulb headlight. If the headlight bulb burns out, replace it as follows. ECA10650 NOTICE Take care not to damage the follow- ing parts: ● Headlight bulb 1.

  • Page 70: Replacing The Tail/Brake Light Bulb

    6. Install the headlight unit by install- 1. Remove the tail/brake light lens by ing the screws. removing the screws. 7. Have a Yamaha dealer adjust the headlight beam if necessary. 1. Tail/brake light bulb 3. Insert a new bulb into the socket, push it in, and then turn it clock- wise until it stops.

  • Page 71: Replacing A Turn Signal Light Bulb

    PERIODIC MAINTENANCE AND ADJUSTMENT EAU24213 EAU24350 Replacing a turn signal light Supporting the motorcycle bulb Since this model is not equipped with a centerstand, follow these precautions 1. Remove the turn signal light lens when removing the front and rear by removing the screws.

  • Page 72: Front Wheel

    PERIODIC MAINTENANCE AND ADJUSTMENT a jack either under each side of the EAU24360 Front wheel frame in front of the rear wheel or under each side of the swingarm. EAU24602 To remove the front wheel EWA10821 WARNING To avoid injury, securely support the vehicle so there is no danger of it falling over.
  • Page 73 PERIODIC MAINTENANCE AND ADJUSTMENT 7. While applying the front brake, push down hard on the handlebars several times to check if the front fork compresses and rebounds smoothly. 8. Connect the speedometer cable. 1. Speedometer gear unit 1. Speedometer gear unit 2.

  • Page 74: Rear Wheel

    PERIODIC MAINTENANCE AND ADJUSTMENT EAU25080 2. Loosen the axle nut and the brake 6. Push the wheel forward, and then Rear wheel torque rod nut at the brake shoe remove the drive chain from the plate. rear sprocket. EAU52340 3. Lift the rear wheel off the ground To remove the rear wheel according to the procedure on EWA10821...

  • Page 75: Troubleshooting

    However, should your motorcycle Tightening torques: require any repair, take it to a Yamaha Drive chain puller locknut: dealer, whose skilled technicians have 16 Nm (1.6 m·kgf, 12 ft·lbf) the necessary tools, experience, and Axle nut: 105 Nm (10.5 m·kgf, 76 ft·lbf)

  • Page 76: Troubleshooting Chart

    Remove the spark plugs and check the electrodes. The engine does not start. Have a Yamaha dealer check the vehicle. Check the battery. 4. Battery The engine turns over The battery is good.

  • Page 77: Motorcycle Care And Storage

    Some models are equipped with ble. Rust and corrosion can develop matte colored finished parts. Be Cleaning sure to consult a Yamaha dealer for even if high-quality components are ECA10772 advice on what products to use be- used. A rusty exhaust pipe may go un-...
  • Page 78 MOTORCYCLE CARE AND STORAGE off any detergent residue using Test the product on a small hid- plenty of water, as it is harmful den part of the windshield to Salt sprayed on roads in the winter may to plastic parts. make sure that it does not leave remain well into spring.

  • Page 79: Storage

    WARNING ing it with a tarp, while it is still ● Contaminants on the brakes or tires Consult a Yamaha dealer for ad- wet, will allow water and humid- can cause loss of control. vice on what products to use.
  • Page 80 MOTORCYCLE CARE AND STORAGE 3. Drain the carburetor float cham- spark plug electrodes while °C (90 °F)]. For more information bers by loosening the drain bolts; turning the engine over. on storing the battery, see page this will prevent fuel deposits from 7-30.

  • Page 81: Specifications

    SPECIFICATIONS Dimensions: Engine oil: Fuel tank capacity: XV250D 9.5 L (2.51 US gal, 2.09 Imp.gal) Overall length: Recommended brand: XV250DC 9.2 L (2.43 US gal, 2.02 Imp.gal) 2190 mm (86.2 in) YAMALUBE Fuel reserve amount: Overall width: Type: 2.6 L (0.69 US gal, 0.57 Imp.gal) 710 mm (28.0 in) SAE 10W-30, 10W-40, 10W-50, 15W-40, Carburetor:...
  • Page 82 SPECIFICATIONS 3rd: Tire air pressure (measured on cold Rear brake: 1.261 (29/23) tires): Type: 4th: Drum brake Loading condition: 1.000 (26/26) Operation: 0–90 kg (0–198 lb) 5th: Right foot operation Front: 0.821 (23/28) Front suspension: 175 kPa (1.75 kgf/cm², 25 psi) Chassis: Rear: Type:...
  • Page 83 SPECIFICATIONS Bulb voltage, wattage × quantity: Headlight: 12 V, 60.0 W/55.0 W × 1 Tail/brake light: 12 V, 8.0 W/27.0 W × 1 Front turn signal/position light: 12 V, 27.0 W/8.0 W × 2 Rear turn signal light: 12 V, 27.0 W × 2 Meter lighting: 12 V, 1.7 W ×...

  • Page 84: Consumer Information

    Record the key identification number, vehicle identification number and mod- el label information in the spaces pro- vided below for assistance when ordering spare parts from a Yamaha dealer or for reference in case the vehi- cle is stolen. KEY IDENTIFICATION NUMBER: 1.
  • Page 85 This information illustration. This label shows specifica- will be needed when ordering spare tions related to exhaust emissions as parts from a Yamaha dealer. required by federal law, state law and Environment Canada. 10-2...

  • Page 86: Reporting Safety Defects

    If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the National Highway Traffic Safety Administration (NHTSA) in addition to notifying Yamaha Motor Corporation, U.S.A. If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign.

  • Page 87: Motorcycle Noise Regulation

    CONSUMER INFORMATION EAU26560 Motorcycle noise regulation TAMPERING WITH NOISE CONTROL SYSTEM PROHIBITED: Federal law prohibits the following acts or the causing thereof: (1) The removal or rendering inoperative by any person other than for purposes of maintenance, repair, or replacement of any device or element of design incorporated into any new ve- hicle for the purpose of noise control prior to its sale or delivery to the ultimate purchaser or while it is in use or (2) the use of the vehicle after such device or element of design has been removed or rendered inoperative by any person.

  • Page 88: Maintenance Record

    CONSUMER INFORMATION EAU26611 Maintenance record Copies of work orders and/or receipts for parts purchased and installed on your motorcycle will be required to document that maintenance has been completed in accordance with the emissions warranty. The chart below is printed only as a reminder that maintenance work is required.
  • Page 89 CONSUMER INFORMATION Maintenance Date of Servicing dealer Mileage Remarks interval service name and address 28000 mi (46000 km) or 54 months 31000 mi (51000 km) or 60 months 10-6...

  • Page 90: Yamaha Motor Corporation, U.s.a. Street And Enduro Motorcycle Limited Warranty

    CONSUMER INFORMATION EAU26663 YAMAHA MOTOR CORPORATION, U.S.A. STREET AND ENDURO MOTORCYCLE LIMITED WARRANTY Yamaha Motor Corporation, U.S.A. hereby warrants that CUSTOMER’S RESPONSIBILITY under this Engine new Yamaha motorcycles will be free from defects in warranty shall be to: Displacement Period...
  • Page 91 CUSTOMER SERVICE What costs are my responsibility during the warranty period? If your machine requires warranty service, you must take it to any authorized Yamaha The customer’s responsibility includes all costs of normal maintenance services, motorcycle dealer within the continental United States. Be sure to bring your warranty non-warranty repairs, accident and collision damages, and oil, oil filters, air filters, registration card or other valid proof of the original date of purchase.

  • Page 92: Yamaha Extended Service (Y.e.s.)

    This excellent Y.E.S. plan coverage is only available to dealer to see how comforting uninterrupted factory- Yamaha owners like you, and only while your Yamaha is still backed protection can be. within the Yamaha Limited Warranty period. So visit your authorized Yamaha dealer to get all the facts.
  • Page 93 Yamaha Limited Warranty expires. A special note: If visiting your dealer isn’t convenient, contact Yamaha with your Primary ID number (your frame number). We’ll be happy to help you get the Y.E.S. coverage you need.
  • Page 94 INDEX Part locations .......... 3-1 Air filter element, cleaning..... 7-14 Front fork, checking ......7-29 Fuel............4-5 Rider seat..........4-9 Fuel cock ..........4-7 Battery........... 7-30 Fuel tank cap .......... 4-5 Brake and clutch levers, checking and Safety defects, reporting .......10-3 Fuses, replacing ........
  • Page 95 INDEX Turn signal switch........4-3 Valve clearance ........7-17 Vehicle Emission Control Information label............ 10-2 Vehicle identification number....10-1 Warranty, extended ......10-9 Warranty, limited........10-7 Wheel bearings, checking ....7-30 Wheel (front) ......... 7-36 Wheel (rear).......... 7-38 Wheels..........7-19...
  • Page 97 Yamalube – Take care of your Yamaha with legendary Yamalube oils, lubricants, and care products. They’re formulated and approved by the toughest judges we know: the Yamaha engineering teams that know your Yamaha from the inside out.
  • Page 98 PRINTED ON RECYCLED PAPER PRINTED IN JAPAN 2012.07-0.6×1 CR...

This manual is also suitable for:

Star xv250dc 2012

Table of Contents