Konica Minolta magicolor 3730DN Reference Manual page 152

Interface Information
The System - Device Information - Interface Information window provides
the following information.
Item
Protocol
Information
Network
Information
Viewing Printer Status
Bonjour
IPP
LPD
RAW Port
SNMP
Type
Description
If Enable is displayed, Bonjour is enabled.
If Disable is displayed, Bonjour is disabled.
If Enable is displayed, IPP is enabled.
If Disable is selected, IPP is disabled.
If Enable is displayed, LPD is enabled.
If Disable is selected, LPD is disabled.
Enable is displayed.
If Enable is displayed, SNMP is enabled.
If Disable is selected, SNMP is disabled.
Identifies the type of network interface
installed on the printer (Ethernet 10Base-T/
100Base-TX).
5-15