Attaching The Leaf Digital Camera Back To The Camera Body - Leaf Aptus II Installation Manual

74

Attaching the Leaf Digital Camera Back to the Camera Body

Mount the Mamiya RB camera on a tripod.
1.
Flip the locking lever on the camera body from left to right into the
2.
Open position.
Attach the Mamiya RB adaptor plate to the camera body.
3.
Insert the four studs on the adaptor into the four holes on the camera
4.
body.
Figure 4: Attaching the Mamiya RB adaptor plate
Secure the adaptor plate to the camera body by flipping the locking
5.
lever on the camera body from right to left into the Locked position.
Remove the protective cover from Leaf Aptus.
6.
Connect the digital camera back to the camera body. Rest the digital
7.
camera back on the lower supports making sure that the lugs are
properly engaged in the recesses.
Move the digital camera back toward the camera body while making
8.
sure that the camera's upper support hooks fit into the slots on Leaf
Aptus.
Push the top of the digital camera back toward the camera body until
9.
it locks in place.
Chapter 8 – Mamiya RB