LIGHT OBJECT LO-X7 Manual page 9

7. Common Parameters Setting
• Work Mode
• Common Parameters
• Axis Speed Parameters
• Rotate Engraving & Cutting
(01)Work mode:
Adjustments for origin and feeding modes.
(02)Common Parameters:
Settings for keypad speed, box speed, and
blow delay.
Common Parameters Settings
01. Work Mode
02. Common Parameters
03. Axis Speed Parameters
04. Rotate Engraving & Cutting
Work Mode
Go Origin After Reset
Origin Mode
GoBack Position
Count Mode
Feeding Mode
Common Parameters
AutoFocus Distance (mm)
KeyMove' Speed (mm/s)
RunBox' Speed (mm/s)
CutBox' Speed (mm/s)
Blow Open Delay (s)
Blow Close Delay (s)
Open
Key Origin
Current Origin
Count Per work
Delay After Feeding
6