LIGHT OBJECT LO-X7 Manual page 8

5. Axes Control:
The setting that resets the Z-axis and
U-axis.
6. Motion Parameters Settings:
Adjustments for the speed of the laser.
Cut Speed & Engraving Speed.(Cut
Jerk)
Axes Control
To reset Z axis
To reset U axis
Motion Parameters Settings
Space Speed (mm/s)
Cut Jerk (mm/s3)
Space Jerk (mm/s3)
Min Acc (mm/s2)
Cut Acc (mm/s2)
Space Acc (mm/s2)
Engrave Acc (mm/s2)
Start Speed (mm/s)
Speed Factor
5