Advertisement
38
Cut Parameters
Speed: Working speed of laser head during cutting.
Working Power: Maximum power; To adjust the maximum value of laser power during processing
Corner Power: Minimum power; the lowest power value during variable motion. It's the power of (Make
sure laser intensity constant during process by adjusting above two parameters).
Overlap Length: Due to tolerance with machine, probably it will happen that closed image can't be
layer(Unit:%). It's the power of laser 1 of AWC708 control panel. Laser1 of AWC708 control panel. cut
off. So this parameter can help to solve this problem. But this parameter should not be too large.
Suggest adjusting precision of machine to solve this problem.
Advertisement
Need help?
Do you have a question about the LO-X7 and is the answer not in the manual?