LIGHT OBJECT LO-X7 Manual page 25

22
Function configuration
XY axis home On Power: If selected, when machine starts, X axis and Y axis will run reset movement
simultaneously (Shall select the option normally)
Z axis home On Power: If selected, when machine starts, Z axis will run reset movement (Shall not select
the option normally)
U axis home On Power: If selected, when machine starts, U axis will run reset movement.(Shall not select
the option normally)
U axis for feeding: If selected, start U axis feeding function. If it's not selected, U axis feeding function will not
work. (Shall select the option normally)
Hardware limit: If selected, system will apply real-time monitoring on limit signal according to the direction of
the movement. When detecting a limit signal as low level, ongoing work will suspend, and "Reach limit!" will be
displayed on the LED.
Return origin after work: If selected, system will return to origin after job completes. Not selected, system
will stay in place after job completes.
Import: allows import manufacturer's complete setting parameter files. Click Import and then locate the file
and open.